From: faimbs <[email protected]> Reply-To: <[email protected]> Date: Friday, May 9, 2014 at 10:42 AM To: <[email protected]> Subject: Re: [beagleboard] User LED forward to GPIO
> Hello John! > > Maybe Charles unterstud what you mean. > > Unfortunately I'm not an expert of DT. So maybe you can explain how I can use > GPIO as usrLED? > > In the am335x-boneblack.dts are GPIO 21 - 24 for usr0 - usr3. But don know if > they are activ and available. > Cannot find these GPIO! I recommend that you always retain the previous responses as I don¹t recall what your original questions was. Anyway, in arch/arm/boot/dts/am335x-bone-common.dtsi, on line 30 you will find the pins used for the LEDs. If you want to move the LEDs to a different GPIO, then this is where you make that change. Regards, John > > Thank you! > > faimbs > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
