I can't really comment. If I had the board, I could look at ti. But, not having it makes it tough to guess.Try powering off the board before you plug the DC back it.
Gerald On Wed, May 7, 2014 at 7:13 AM, pjwl <[email protected]> wrote: > Hello, > > Today I worked with my BBB on 5V supply and everythings works fine. Then I > did connect an Lipo battery to the TP5/TP6 and TP8 and a 10Kohm between TP7 > en TP8. > > My idea was to research how the charger of the PMIC works, I connected an > 5V supply for about 1.5A and everythin works fine, the battery charges > correctly and when the supply is disconnected it works ok. > > After a while I disconnected the battery and connected the supply of 5V > again, but now the power LED flashes up, about 1 second off and 100 a > 250msec on. It seems the PMIC is not starting, what is strange because > earlier it works fine. > > When I connect the battery again and put on the 5V supply everything works > normal, the battery is going to charge and BBB is starting up. > > Does somebody has an idea why the BBB wont work anymore with only the > supply connected? > > Thanks in advance > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
