with the good link http://dumb-looks-free.blogspot.fr/2014/04/bbb-hdmi-debian-x11lde-display-problem.html
On Tuesday, 6 May 2014 17:03:23 UTC+2, DLF wrote: > > Hello > > it sounds like you have a similar problem to what I had experienced. > > There is a thread in google groups somewhere (can't find it) about this > issue but I wrote it up here > link<http://dumb-looks-free.blogspot.fr/2014/04/bbb-hdmi-debi>as well > My specfic situation was for debian, but some others have indicated it > works for angstrom too. > > maybe have a look at this to see if it can give you some clues. > > good luck > > > > On Tuesday, 6 May 2014 15:04:26 UTC+2, [email protected] wrote: >> >> Hi: >> >> I've tried these two latest images on a 8Gb microSD card: >> >> Angstrom-Cloud9-IDE-GNOME-eglibc-ipk-v2012.12-beaglebone-2013.06.20.img >> >> Angstrom-Cloud9-IDE-GNOME-eglibc-ipk-v2012.12-beaglebone-2013.09.05.img >> >> In both cases, the board boots, and it shows the beaglebone logo image >> for a few seconds and a login ASCII screen, but then, the HDIM video is off. >> >> I can access the board via Serial cable (FTDI), but is seems the HDMI >> video is disabled. >> >> When booting from the eMMC with the original build from manufacturing, >> the video works fine on that same board, so there is no HDMI cable, power >> issues. >> >> Any idea how to enable the HDMI video when using the latest Angtrom build >> booting from microSD card >> >> Thanks, >> >> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
