*Connect BeagleBone Black with USB to RS232/TTL Converter* The* USB to RS232/TTL Converter* module provides a simple method of adapting legacy serial units with RS232 interfaces, to modern USB ports. This is accomplished by using the industry standard *FTDI FT230X*USB-Serial bridge IC.
<https://lh3.googleusercontent.com/-8rpFTKsCqfQ/U2XbjjS_I7I/AAAAAAAAAAc/UdiPzSiFzAc/s1600/main.jpg> *F**eatures:* • Support RS232/TTL output and input • Add one RS-232 serial port (3.5mm Jack) for Intel Galileo. • Operates with, and powered by, USB 1.1 or USB 2.0 host or hub. • FIFO: 512 byte transmit buffer, 512 byte receive buffer. • 12Mbps USB Full Speed interface and up to 1Mbps on the RS232 interface. • LED indicate status & easy diagnostics. • Data transfer rates from 300 baud to 3 Mbaud. <https://lh6.googleusercontent.com/-woTfc9BRwf4/U2XbvwH9tkI/AAAAAAAAAAo/RXj72_FoQV8/s1600/boards.jpg> *The* *converter is able to connect Raspberry Pi, BeagleBone Black and more boards. * *Want more details? Please go to **www.goembed.com*<http://www.goembed.com/> -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
