I have one more question to ask. Please bear up with me. In the link that
you have sent, I find that RMA can be filed only if the stock has been
purchased from an authorized distributor. I am from India. Here we have
three authorized distributors and all of them were out of stock. As we are
hurrying up with our final year BE project we had to buy one from another
online shop. Would my application for an RMA be considered?
On Wednesday, March 26, 2014 9:40:44 PM UTC+5:30, Gerald wrote:
>
> OK. Information is helpful. It helps people help you when they are
> crafting a response. Nice to know you have another board that works.
>
> I would say based on the added sentences, unless you have more to tell,
> that the other board, the one that does not work and heats up, is damaged.
> I suggest you go to this link:
>
> http://www.elinux.org/Beagleboard:BeagleBoneBlack item #15 in the menu.
>
>
> Gerald.
>
>
> On Wed, Mar 26, 2014 at 10:59 AM, Jones Jebaraj
> <[email protected]<javascript:>
> > wrote:
>
>> And yes, the instructions were perfectly followed for flashing. I think
>> this might not be wrong because i have already flashed my other BBB three
>> or four times
>>
>>
>> On Wednesday, March 26, 2014 9:24:22 PM UTC+5:30, Jones Jebaraj wrote:
>>>
>>> Thank you Gearald, for you timely reply.I am using a 5V Power bank to
>>> power the board. But I think that the power supply may not be the problem
>>> because the same does occur when I connect it via my laptop. Also I forgot
>>> to mention that the board heats up unusually. It is worthwhile to mention
>>> that I have another BBB which works on the same power bank without issues.
>>>
>>> On Wednesday, March 26, 2014 9:14:17 PM UTC+5:30, Gerald wrote:
>>>>
>>>> I would make sure you flash it correctly per the instructions and run
>>>> it from the DC jack.
>>>>
>>>> Depending on what you have plugged in and how good the USB power source
>>>> is, it may not power the board.
>>>>
>>>> Gerald
>>>>
>>>>
>>>>
>>>> On Wed, Mar 26, 2014 at 10:40 AM, Jones Jebaraj <[email protected]
>>>> > wrote:
>>>>
>>>>> Hi all
>>>>> I am a newbie to beagle bone black. My BBB is not booting. When
>>>>> powerd with the barrel connector, only the power led is glowing.Any of
>>>>> the
>>>>> USR leds does not glow. Tried to reflash the eMMC, but no change. Also
>>>>> the
>>>>> board does not power up with the usb cable. Any suggestions??
>>>>>
>>>>> --
>>>>> For more options, visit http://beagleboard.org/discuss
>>>>> ---
>>>>> You received this message because you are subscribed to the Google
>>>>> Groups "BeagleBoard" group.
>>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>>> an email to [email protected].
>>>>> For more options, visit https://groups.google.com/d/optout.
>>>>>
>>>>
>>>> --
>> For more options, visit http://beagleboard.org/discuss
>> ---
>> You received this message because you are subscribed to the Google Groups
>> "BeagleBoard" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to [email protected] <javascript:>.
>> For more options, visit https://groups.google.com/d/optout.
>>
>
>
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
