Not sure what your issue is. You may need to request and RMA and get it looked at to see if there is a HW issue. 1 time out of 100 seems to indicate there could be an issue in the HW.
Gerald On Wed, Jan 8, 2014 at 9:17 AM, Andreas Tauböck <[email protected]>wrote: > I hava a similar problem, just it almost everytime does not boot. I have > 1.2A and nothing connected, just uSD card inserted. Also tried to flash the > eMMC or boot from uSD, no success. And when it boots one of a hundret tries > and i do not diconnect the power source an just reboot in shell, it is the > same again. > > Can anybody please help me? > > Am Mittwoch, 31. Juli 2013 23:48:54 UTC+2 schrieb [email protected]: > >> Hi guys, >> >> we have a problem with our Beagle Bone Black (A5C). We are using Ubuntu >> Raring 13.04 armhf v3.8.13-bone21 (2013-06-14) on the eMMC (no SD Card). >> The Beagle Bone is placed in a case and we have connected it to a DC power >> supply. Sometimes (I would say every 5 to 10 times), when we are plugging >> in our power supply, the BeagleBone powers on (Power LED is on), but >> nothing more happens (none of the other four LEDs is on). If we are now >> removing the power supply and putting it in again, the BBB starts normally. >> I guess the power supply is strong enough: 5A@5V. >> >> Thanks for your help in advance. >> >> Regards, >> duckhunter >> > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
