I'm powering the Beagle with a 5V 2.0A generic adapter we just happened to have here that fit it. It seems to work ok when I have the Angstrom distro mmc in. Here is the output after the mk_mmc.sh script.
http://pastebin.com/v5vm9KGH Thanks, Matt On Thursday, December 12, 2013 4:49:07 PM UTC-5, RobertCNelson wrote: > > On Thu, Dec 12, 2013 at 3:40 PM, <[email protected] <javascript:>> > wrote: > > As root I ran ./mk_mmc.sh --mmc /dev/sdc --dtb omap3-beagle-xm --distro > > raring and everything appeared to go fine. I just followed the steps in > the > > "Download a complete pre-configured image" section exactly and it still > > doesn't seem to be doing anything. I'm not getting any response from the > > HDMI/DVI, When plugged in with an RS-232 cable I don't get anything > using > > minicom(settings are 115200 8N1,no hardware or software flow control), > and > > it doesn't appear that it's doing anything. I verified that it's not the > SD > > card i'm using because I used dd to make an exact image of the stock > > Angstrom mmc, and burned that to the SD card i've been trying to use for > > Ubuntu and that booted as well. It's like the beagle isn't seeing > something > > that triggers it to try and boot. I've got two partitions just like the > > stock card, one for boot and the other for rootfs. Sorry if I forgot and > > left anything out, I'm really new to BeagleBoard. > > You should be seeing this on the serial port: > > http://pastebin.com/wyJt4cyK > > with 5 green led's.. > > How are you powering the beagle xm? > > Can you pastebin.com your terminal output after running: > sudo ./mk_mmc.sh --mmc /dev/sdc --dtb omap3-beagle-xm --distro raring > > Regards, > > -- > Robert Nelson > http://www.rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
