Your posts are moderated until you subscribe. It is a very nice way to stop the 100 spam posts I see per day.
Once you subscribe, your first post is moderated. After that the posts will go through without moderation. Gerald On Wed, Dec 4, 2013 at 5:19 PM, <[email protected]> wrote: > Good afternoon, > I'm sorry about making a 2nd post, but I could not find my original post > anywhere and edit it. The following is the course of action that lead to > this issue. > > 1. Initially, BBB was able to boot from either the on board image, > 2. Then BBB was able to boot from the SDcard image. Downloaded from > http://beagleboard.org/latest-images (top image) > 3. Once I Pressed the Reset button, it stopped booting from the SD > card images, but still showed the SDcard 1st partition in Windows (with the > U-boot and MLO), I could no longer connect to it via web or ssh. > 4. Once the SD card was removed, it booted just find from NAND, I was > able to log in > 5. After many unsuccessful attempts to re-flash this image to the SD > card, step 3 continued to occur. > 6. I have not made any changes to what is on NAND, and I have not > downloaded an image that automatically re-flashes NAND > 7. I tried to boot from NAND, without an SD card, and the partition > does not appear in Windows and I cannot log in using SSH or Web. I could > not see the COM port in terminal when plugged in via USB > 8. I figured this was an issue with 64bit windows drivers, and tried > plugging into an Ubuntu machine, > 9. I still could not connect > > > What could be wrong? I did nothing at all aside from plugging and > unplugging the device and inserting and removing the SD card when the > device was unpowered. > > > Thanks, > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
