I am not sure as to whether or not it works with that particular version of Mentor, but the Mentor version of the schematic is on the support Wiki.
http://circuitco.com/support/index.php?title=BeagleBoneBlack#Hardware_Files Gerald On Fri, Nov 1, 2013 at 1:19 PM, <[email protected]> wrote: > Hello, > > I was wondering if anyone had the schematic symbols for the Beaglebone > or the Beaglebone Black boards which will work with Mentor Graphics' > DxDesigner. I have prototyped a much larger system using the BeagleBone > Black board and many other evaluation boards and now I am integrating all > of the components onto a custom pcb. It would save me countless hours of > work, and reduce the probability of making a mistake when creating my own > symbols, if someone had them already. I downloaded the files from the > Beaglebone Black Wiki page but there are only a few symbols in the included > libraries. The pcb decals are not a problem because I simply can open up > the pcb file and click on a specific decal and then save it in my custom > library. However, this does not work with DxDesigner, and I called Mentor > Graphics customer support and they said that the schematic symbols had to > be included in the schematic library, but were not in the downloaded > files. Any help would be greatly appreciated! > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/groups/opt_out. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
