Hi, finally i've tested that option but still failing... speed test is the best with that blocksize, but if it fail i'll to use other.
I've tried all blocksize of bareos "Speed Tuning of Tape Drives" doc, and all under 262144 (256K) works perfect, but all above that size fails... Tapeinfo shows this: MinBlock: 1 MaxBlock: 16777215 BlockSize: 0 Greetings!! El viernes, 19 de diciembre de 2014 09:25:15 UTC+1, Adam Podstawka escribió: > Hi, > > maybe you need tu set "label Block Size = 1048576", setting the Label > Block Size correctly. Had a similar problem before, when i used bareos > 13.x and went to 14.2 > > Greets > Adam > > > Am 18.12.14 um 19:21 schrieb Daniel Carrasco Marín: > > El jueves, 18 de diciembre de 2014 19:14:28 UTC+1, Daniel Carrasco Marín > > escribió: > >> Hi, finally i've finished to install Bareos on my server and when i'm > >> doing a tape test i get this strange error: > >> > >> *test > >> > >> === Write, rewind, and re-read test === > >> > >> I'm going to write 10000 records and an EOF > >> then write 10000 records and an EOF, then rewind, > >> and re-read the data to verify that it is correct. > >> > >> This is an *essential* feature ... > >> > >> btape: btape.c:1165-0 Wrote 10000 blocks of 1048476 bytes. > >> btape: btape.c:612-0 Wrote 1 EOF to "triky_cinta.de" (/dev/st0) > >> btape: btape.c:1181-0 Wrote 10000 blocks of 1048476 bytes. > >> btape: btape.c:612-0 Wrote 1 EOF to "triky_cinta.de" (/dev/st0) > >> btape: btape.c:1223-0 Rewind OK. > >> Got EOF on tape. > >> btape: btape.c:1241-0 Read block 3617 failed! ERR=Conseguido > >> > >> > >> is strange, because "Conseguido" isn't an error (is like "got" in > >> english)... When I use "status i get: > >> > >> *status > >> EOF Bareos status: file=1 block=0 > >> Device status: EOF ONLINE IM_REP_EN file=1 block=0 > >> btape: btape.c:2149-0 Device status: 643. ERR=block.c:1022 Read zero bytes > >> at 0:0 on device "triky_cinta.de" (/dev/st0). > >> > >> I've used this tape drive on Bacula and it worked fine, and the only I've > >> changed between bacula and bareos is "maximum block size". > >> > >> Someone knows what happen? > >> > >> thanks!! > > > > Sorry for double post but have news. > > I've disabled Maximum Block Size to use default size and works fine... Why > > fail with 1MB blocks and works fine with default? > > Tape Drive status is OK (don't have any error on display). > > > > Greetings!! > > > > -- > Adam Podstawka > Informatician - Bioinformatics > Leibniz Institute DSMZ-German Collection of Microorganisms and Cell Cultures > Inhoffenstr. 7 B > 38124 Braunschweig > Germany > > www.dsmz.de > > Director: Prof. Dr. Jörg Overmann > Local court: Braunschweig HRB 2570 > Chairman of the management board: RD Dr. David Schnieders > > DSMZ - A member of the Leibniz Association > www.leibniz-gemeinschaft.de -- You received this message because you are subscribed to the Google Groups "bareos-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. For more options, visit https://groups.google.com/d/optout.
