Re: [Bacula-users] LTO-7 btape speed test

fk+bacula--- via Bacula-users Tue, 04 May 2021 22:08:27 -0700

I have found  the solution:

There was a cooling issue inside the server which mounts the LTO drive.A fan wasn't working. The higher temperature slows down the drive drivespeed.

Now I have backed up:


Despooling elapsed time = 00:39:31, Transfer rate = 285.3 M Bytes/second

Using 20 GB file size and block size with 512k, wave Audio Files, nohardware compression, 1% lz4 software compression


Thanks, Frank

Am 26.04.2021 um 16:49 schrieb Udo Kaune:

Hi,
The speed test is not to the tape but to and from the spool driveonly. The transfer rates are from real data (audio files).
HTH

Am 26.04.21 um 16:17 schrieb Kern Sibbald:
Hello,
If you are sending blocks of zeros to a tape drive, it is useless tocompare speeds to anything that sends real data. Zero data input tomost tape drives is almost completely optimized (compressed) out, soone gets very large, unrealistic speeds. Try sending random datathen you will get a better idea of how fast the drive actually can write.
Best regards,
Kern

On 4/25/21 12:36 PM, Udo Kaune wrote:
In regard to possible compression 360MB/sec seems slow for a spooldrive serving an LTO-7. This is data from an 8 drive RAID 6 DELL box(PERC730P):
root@pangaea:~# dd if=/dev/zero of=/dev/null bs=1M count=32000
33554432000 bytes (34 GB, 31 GiB) copied, 1.89847 s, 17.7 GB/s
root@pangaea:~# dd if=/dev/zero of=test.zero bs=1M count=32000conv=fsync
33554432000 bytes (34 GB, 31 GiB) copied, 29.3056 s, 1.1 GB/s

root@pangaea:~# dd if=test.zero of=/dev/null bs=1M
33554432000 bytes (34 GB, 31 GiB) copied, 27.9066 s, 1.2 GB/s

root@pangaea:~# tapeinfo -f /dev/nst0
Product Type: Tape Drive
Vendor ID: 'IBM     '
Product ID: 'ULTRIUM-HH7     '
Revision: 'K4K1'
Attached Changer API: No
SerialNumber: '10WT141102'
MinBlock: 1
MaxBlock: 8388608
SCSI ID: 0
SCSI LUN: 0
Ready: yes
BufferedMode: yes
Medium Type: 0x78
Density Code: 0x5c
BlockSize: 0
DataCompEnabled: yes
DataCompCapable: yes
DataDeCompEnabled: yes
CompType: 0xff
DeCompType: 0xff
Block Position: 5264131
Partition 0 Remaining Kbytes: -1
Partition 0 Size in Kbytes: -1
ActivePartition: 0
EarlyWarningSize: 0
NumPartitions: 0
MaxPartitions: 3

Device {
  Name = IBM-LTO7
  Media Type = LTO
  Archive Device = /dev/nst0
  Automatic Mount = yes
  Always Open = yes
  Removable Media = yes
  Random Access = no
  Maximum Spool Size = 256GB
  Spool Directory = /home/bacula/spool
  Maximum File Size = 32GB
  # Maximum Block Size = 524288
  Maximum Block Size = 1048576
  Backward Space File = yes
  Fast Forward Space File = yes
}
19-Apr 16:46 pangaea-dir JobId 1466: Start Backup JobId 1466,Job=srv.2021-04-19_16.00.00_05
19-Apr 16:46 pangaea-dir JobId 1466: Using Device "IBM-LTO7" to write.
19-Apr 16:46 pangaea-sd JobId 1466: Spooling data ...
19-Apr 17:10 pangaea-sd JobId 1466: User specified Device spool sizereached: DevSpoolSize=256,000,176,844 MaxDevSpoolSize=256,000,000,00019-Apr 17:10 pangaea-sd JobId 1466: Writing spooled data to Volume.Despooling 256,000,176,844 bytes ...19-Apr 17:26 pangaea-sd JobId 1466: Despooling elapsed time =00:15:54, Transfer rate = 268.3 M Bytes/second
19-Apr 17:26 pangaea-sd JobId 1466: Spooling data again ...
19-Apr 17:52 pangaea-sd JobId 1466: User specified Device spool sizereached: DevSpoolSize=256,000,176,881 MaxDevSpoolSize=256,000,000,00019-Apr 17:52 pangaea-sd JobId 1466: Writing spooled data to Volume.Despooling 256,000,176,881 bytes ...19-Apr 18:08 pangaea-sd JobId 1466: Despooling elapsed time =00:16:13, Transfer rate = 263.1 M Bytes/second
19-Apr 18:08 pangaea-sd JobId 1466: Spooling data again ...
19-Apr 18:16 pangaea-sd JobId 1466: Committing spooled data toVolume "G-0620-6". Despooling 56,071,784,596 bytes ...19-Apr 18:19 pangaea-sd JobId 1466: Despooling elapsed time =00:03:04, Transfer rate = 304.7 M Bytes/second19-Apr 18:19 pangaea-sd JobId 1466: Elapsed time=01:32:46, Transferrate=102.0 M Bytes/second19-Apr 18:19 pangaea-sd JobId 1466: Sending spooled attrs to theDirector. Despooling 6,326 bytes ...
19-Apr 18:19 pangaea-dir JobId 1466: Bacula pangaea-dir 9.6.7 (10Dec20):

HTH, Udo

Am 21.04.21 um 09:14 schrieb fk+bacula--- via Bacula-users:
Hello there,

I'm using a Quantum LTO-7 HH drive with Ultrium LTO-7 tapes.
The streamer is connected on a SAS HAB microsemi 1100-4i.

I set the Maximum block size = 524288

and run: speed file_size=3 skip_raw
with zero data and bacula block structure Total Write rate = *311.7MB/s*
with random data: Total Write rate = *94.74 MB/s*
For backup I use the spooling function. Two SATA hdd's are build aRAID-0 (stripe) array.
This array is used for holding the spooling data (spool directory)

testing:
**** write test  ****
dd if=/dev/zero of=/backup_spool/testfile bs=1M count=204800conv=fdatasync,notrunc
204800+0 Datensätze ein
204800+0 Datensätze aus
214748364800 bytes (215 GB, 200 GiB) copied, 596,839 s, *360 MB/s*

**** read test ****
dd if=/backup_spool/testfile of=/dev/null bs=1M count=204800
204800+0 Datensätze ein
204800+0 Datensätze aus
214748364800 bytes (215 GB, 200 GiB) copied, 625,029 s, *344 MB/s*
Have made test backup (1,1 TByte) and have monitored a constantwrite rate of 200 MByte/s during despooling.
Are the write values of the tape drive OK for a LTO-7 environment?

Thanks for any hints, Frank
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
--
Bitte denken Sie an die Umwelt, bevor Sie Mails drucken.
Please consider the environment before printing mails.
--
Integrative Netzwerke Udo Kaune
Deichstraße 6
25335 Elmshorn
Tel: +49 (4121) 579 69 35
Fax: +49 (4121) 579 69 99
Web:http://www.inet-hamburg.de
Handelsregister Pinneberg: HRA 1509 EL


_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users

_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users

Re: [Bacula-users] LTO-7 btape speed test

Reply via email to