I've got one client where backups consistently stall and eventually
timeout after backing up 6 files (~760KB). The backup consistently stalls
at the 7th file:
Processing file: /boot/System.map-3.10.0-693.el7.x86_64
That file is valid on the client (there are no I/O errors) and bacula-fd
runs as root, with permission to read the file.
The client & server are both running 9.6.5 now, but before today
the server was at 9.5.1 and the client at 9.2.x, with the same
behavior. Restarting bacula-fd on the client does not help.
The server is able to successfully run the "estimate" command, which
returns an expected value of about 90GB to be backed up from that client.
The client & server are multi-homed, but are on the same network. The
client configuration on the bacula-dir specifies the client by IP,
to ensure that traffic goes via the faster network common to the two
machines.
Other clients on the same network backup successfully (many TB per day).
When the job times out at 15min 4* seconds, the client eventually reports only:
Network send error to SD. ERR=Connection timed out
even with "-d 200" set to enable debugging.
The server reports:
Error: bsock.c:383 Write error sending 24573 bytes to Storage
daemon:bacula-server:9103: ERR=Connection timed out
Any thoughts?
Thanks,
Mark
--
Mark Bergman voice: 215-746-4061
[email protected] fax: 215-614-0266
http://www.med.upenn.edu/cbica/
IT Technical Director, Center for Biomedical Image Computing and Analytics
Department of Radiology University of Pennsylvania
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
