Hello,
I recently added 5 tapes that were new to the library. Bacula is configured
to put expired tapes on Scratch pool, but I couldn't be able to label the tapes
under that pool, so I labelled it under eng_father.
[william@backup ~]$ echo "list volume" | bconsole | grep 000006L6
| 132 | 000006L6 | Append | 1 | 64,512 | 0 |
5,184,000 | 1 | 9 | 1 | LTO-6 | 0 | 0 |
NULL | NULL |
[william@backup ~]$ echo "list volume" | bconsole | less
Everything seems fine, but the system never seem to be able to use the tapes.
Its stuck in this state.
Device status:
Autochanger "SuperLoader3" with devices:
"ULTRIUM-HH7" (/dev/nst0)
Device Tape is "ULTRIUM-HH7" (/dev/nst0) waiting for:
Volume: 000006L6
Pool: eng_father
Media type: LTO-6
Total Bytes Read=0 Blocks Read=0 Bytes/block=0
Positioned at File=1 Block=0
Device is being initialized.
Slot 9 is loaded in drive 0.
==
====
Used Volume status:
Reserved volume: 000006L6 on Tape device "ULTRIUM-HH7" (/dev/nst0)
Reader=0 writers=3 reserves=25 volinuse=1
What could I be doing wrong here?
Regards,
William
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
