Hello,
We have a quantum superloader 3 that seem to be fine when tested through mt and
mtx command.
[root@eng-backup02 ~]# lsscsi -g
[0:2:0:0] disk DELL PERC H710P 3.13 /dev/sda /dev/sg0
[1:0:2:0] tape IBM ULTRIUM-HH6 E4J1 /dev/st0 /dev/sg1
[1:0:2:1] mediumx QUANTUM UHDL 0091 /dev/sch0 /dev/sg2
[root@eng-backup02 ~]#
When we run btape -c test, the command, it come back successful for all tape
tests. However, for the autochanger, I am getting this error. Have anyone
seen it before and how did you resolve it?
=== Autochanger test ===
3301 Issuing autochanger "loaded" command.
Slot 3 loaded. I am going to unload it.
3302 Issuing autochanger "unload 3 0" command.
unload status=OK 0
3303 Issuing autochanger "load 1 0" command.
3993 Bad autochanger command: /etc/bacula/scripts/mtx-changer /dev/sg2 load 1
/dev/nst0 0
3993 result="Loading media from Storage Element 1 into drive 0...done
": ERR=Child died from signal 15: Termination
You must correct this error or the Autochanger will not work.
*
Below is my storage configurations:
Autochanger {
Name = SuperLoader3
Device = ultrium1
Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d"
Changer Device = /dev/sg2
}
Device {
Name = ultrium1
Media Type = LTO-6
Archive Device = /dev/nst0
# Drive Index = 1
LabelMedia = yes; # lets Bacula label unlabeled media
Random Access = no;
AutomaticMount = yes; # when device opened, read it
RemovableMedia = yes;
AlwaysOpen = yes;
Autochanger = yes;
}
Would appreciate any guidance a lot
Regards,
William
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
