Hello, The message says that there is no available volumes in the DifPool that your job need to run.
When dealing with tapes, you need to run a "label" command before using them. Have you already did this? Also, if you have barcode enabled in your TL, you should run a "label barcode" instead. Best regards, Ana On Wed, Jul 27, 2016 at 8:08 PM, nirvana <[email protected]> wrote: > i have the next problem: > > Device tape: "Drive-0" (/dev/nst0) is not open. > Device is BLOCKED waiting for media. > Drive 0 is not loaded. > > srvbacula-sd JobId 579: Please mount append Volume "VXS016L6" or label a > new one for: > Job: srvdigital-job.2016-07-27_13.36.03_27 > Storage: "Drive-1" (/dev/nst1) > Pool: DifPool > Media type: LTO-6 > > Why does this happen? > > bacula.sd.conf > > # For Bacula release 7.4.1 (02 May 2016) -- debian 8.5 > # Copyright (C) 2000-2015 Kern Sibbald > # License: BSD 2-Clause; see file LICENSE-FOSS > > Storage { > Name = srvbacula-sd > SDPort = 9103 > Pid Directory = "/var/run" > WorkingDirectory = "/opt/bacula/working" > Maximum Concurrent Jobs = 100 > Maximum Concurrent Jobs = 20 > SDAddress = 192.90.90.97 > } > Director { > Name = srvbacula-dir > Password = "caronica.123" > } > Director { > Name = srvbacula-mon > Password = "caronica.123" > Monitor = yes > } > Autochanger { > Name = Autochanger > Device = Drive-0 > Device = Drive-1 > Changer Command = "/etc/bacula/mtx-changer %c %o %S %a %d" > Changer Device = /dev/changer > } > Device { > Name = Drive-0 > Drive Index = 0 > Media Type = LTO-6 > Archive Device = /dev/nst0 > # LabelMedia = yes; > AutomaticMount = yes; > AlwaysOpen = yes; > RemovableMedia = yes; > RandomAccess = no; > Autochanger = yes; > # Maximum Spool Size = 50G > } > > Device { > Name = Drive-1 > Drive Index = 1 > Media Type = LTO-6 > Archive Device = /dev/nst1 > # LabelMedia = yes; > AutomaticMount = yes; > AlwaysOpen = yes; > RemovableMedia = yes; > RandomAccess = no; > Autochanger = yes; > # Maximum Spool Size = 50G > } > > Messages { > Name = Standard > director = srvbacula-dir = all > } > > bacula-dir.conf > > Storage { > Name = MSL2024 > Address = 192.90.90.97 > SDPort = 9103 > Password = "1234" > Device = Autochanger > Media Type = LTO-6 > Autochanger = yes > Maximum Concurrent Jobs = 20 > } > Pool { > Name = FullPool > Pool Type = Backup > Recycle = yes > AutoPrune = yes > Volume Retention = 3 years > Maximum Volumes = 100 > Maximum Volume Jobs = 100 > } > Pool { > Name = DifPool > Pool Type = Backup > Recycle = yes > AutoPrune = yes > Volume Retention = 1 years > Maximum Volumes = 100 > Maximum Volume Jobs = 100 > } > Pool { > Name = IncrPool > Pool Type = Backup > Recycle = yes > AutoPrune = yes > Volume Retention = 6 months > Maximum Volumes = 100 > Maximum Volume Jobs = 100 > } > > i need help pleasse!!! I don't I do not understand that I need > > +---------------------------------------------------------------------- > |This was sent by [email protected] via Backup Central. > |Forward SPAM to [email protected]. > +---------------------------------------------------------------------- > > > > > ------------------------------------------------------------------------------ > _______________________________________________ > Bacula-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/bacula-users >
------------------------------------------------------------------------------
_______________________________________________ Bacula-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/bacula-users
