Wanderlei, I am able to ping and also telent to port 9102 from the bacula server to the client (Debian on sparc architecture). I am able to telnet to port 9103 from the client to the bacula server.
I re-installed bacula and still have the same problem. Thank you. Uthra From: Wanderlei Huttel [mailto:[email protected]] Sent: Tuesday, July 28, 2015 12:59 PM To: Rao, Uthra R. (GSFC-672.0)[ADNET SYSTEMS INC] Cc: [email protected] Subject: Re: [Bacula-users] backup job failing on Debian client Hi Uthra I had a problem (not with bacula), but with network adapter that wasn't compatible with the SO. Have you try a ping to verify packet loss? One another suggestion reinstall bacula client on machine. Best Regards Wanderlei 2015-07-28 12:49 GMT-03:00 Heitor Faria <[email protected]<mailto:[email protected]>>: Hello Uthra: do you have selinux enabled on the storage daemon side (RHEL)? Does your connection go through a firewall or maybe a nasty router? Depending on your answers you may try to use the "Heartbeat Interval" option in the affected daemons. Hello Heitor, SELINUX is not enabled on the bacula server. All the other client backups configured on this bacula server is working fine. I tried adding the “Heartbeat Interval 60” in the client–dir and client–fd files. The backup of the Debian client is still failing: ***Fatal error: Network error with FD during Backup: ERR=No data available 28-Jul 11:28 lindy-sd JobId 18819: Fatal error: append.c:160 Error reading data header from FD. ERR=No data available**** Iptables? Is there any way you are using a 32bits client on a 64 environment? Regards, =========================================================================== Heitor Medrado de Faria - LPIC-III | ITIL-F | Bacula Systems Certified Administrator II Do you need Bacula training? https://www.udemy.com/bacula-backup-software/?couponCode=bacula-list +55 61 <tel:%2B55%2061%202021-8260> 8268-4220<tel:%2B55%2061%208268-4220> Site: http://bacula.us FB: heitor.faria<http://www.facebook.com/heitor.faria> =========================================================================== Thank you. Uthra From: Heitor Faria [mailto:[email protected]<mailto:[email protected]>] Sent: Tuesday, July 28, 2015 10:03 AM To: Rao, Uthra R. (GSFC-672.0)[ADNET SYSTEMS INC] Cc: Ana Emília M. Arruda; [email protected]<mailto:[email protected]> Subject: Re: [Bacula-users] backup job failing on Debian client Hi Ana, I had just cut and pasted the relevant part of the log. The fileset is -> “File = /” (it has to back-up everything from root). Thank you. From: Ana Emília M. Arruda [mailto:[email protected]] Sent: Tuesday, July 28, 2015 1:05 AM To: Rao, Uthra R. (GSFC-672.0)[ADNET SYSTEMS INC] Cc: [email protected]<mailto:[email protected]> Subject: Re: [Bacula-users] backup job failing on Debian client Hello Uthra, Do you have more log lines for this job? Have you checked if you have the asked filset in this client? It seems that there is no data in this Debian client for the fileset configured. Best regards, Ana On Mon, Jul 27, 2015 at 12:12 PM, Rao, Uthra R. (GSFC-672.0)[ADNET SYSTEMS INC] <[email protected]<mailto:[email protected]>> wrote: I am having a problem with a Debian client. Here is the information: - Bacula Server is a RHEL 6 : Bacula version 5.2.12 with a Tape Library connected to it (LTO5) - Bacula client is Debian O.S. (bacula version 5.2.6) I am able to connect to the client from “bconsole”. I am also able to start a backup job but it fails before it starts spooling. The bacula report shows: Fatal error: Network error with FD during Backup: ERR=No data available 27-Jul 10:53 lindy-sd JobId 18794: Fatal error: append.c:160 Error reading data header from FD. ERR=No data available Error: Director's comm line to SD dropped Hello Uthra: do you have selinux enabled on the storage daemon side (RHEL)? Does your connection go through a firewall or maybe a nasty router? Depending on your answers you may try to use the "Heartbeat Interval" option in the affected daemons. Regards, ======================================================================= Heitor Medrado de Faria - LPIC-III | ITIL-F | Bacula Systems Certified Administrator II 29 de junho a 13 de julho: Treinamento Telepresencial Bacula: http://www.bacula.com.br/?p=2174 61 <tel:%2B55%2061%202021-8260> 8268-4220<tel:%2B55%2061%208268-4220> Site: www.bacula.com.br<http://www.bacula.com.br/> | Facebook: heitor.faria<http://www.facebook.com/heitor.faria> ======================================================================== I ran the bacua-sd in a debug mode and got the output: *****-sd: dircmd.c:175-0 Conn: Hello Director *****-dir calling *****-sd: dircmd.c:191-0 Got a DIR connection at 27-Jul-2015 10:53:38 *****-sd: cram-md5.c:72-0 send: auth cram-md5 <1298524369.1438008818@*****-sd<mailto:1298524369.1438008818@*****-sd>> ssl=0 *****-sd: cram-md5.c:131-0 cram-get received: auth cram-md5 <1052271812.1438008818@*****-dir<mailto:1052271812.1438008818@*****-dir>> ssl=0 *****-sd: cram-md5.c:150-0 sending resp to challenge: y//5v5k543Fl2i/YWyF5uB *****-sd: dircmd.c:213-0 Message channel init completed. *****-sd: dircmd.c:220-0 <dird: cancel Job=explore.2015-07-27_10.52.05_03 *****-sd: dircmd.c:234-0 Do command: cancel *****-sd: askdir.c:345-18794 Update cat VolBytes=1024 *****-sd: askdir.c:368-18794 >dird CatReq Job=explore.2015-07-27_10.52.05_03 UpdateMedia VolName=B01160L5 VolJobs=1 VolFiles=1 VolBlocks=0 VolBytes=1024 VolMounts=3 VolErrors=0 VolWrites=15122819 MaxVolBytes=0 EndTime=1438008823 VolStatus=Append Slot=32 relabel=0 InChanger=1 VolReadTime=0 VolWriteTime=11237175650 VolFirstWritten=0 VolParts=0 *****-sd: acquire.c:528-18794 dir_update_vol_info. Release vol=B01160L5 dev="Drive-1" (/dev/nst0) *****-sd: vol_mgr.c:549-18794 === clear in_use vol=B01160L5 *****-sd: vol_mgr.c:565-18794 === set not reserved vol=B01160L5 num_writers=0 dev_reserved=0 dev="Drive-1" (/dev/nst0) *****-sd: acquire.c:545-18794 0 writers, 0 reserve, dev="Drive-1" (/dev/nst0) *****-sd: acquire.c:584-18794 JobId=18794 broadcast wait_device_release at 27-Jul-2015 10:53:43 *****-sd: acquire.c:605-18794 ===== Device "Drive-1" (/dev/nst0) released by JobId=18794 *****-sd: spool.c:785-18794 Close attr spool file at 27-Jul-2015 10:53:43 *****-sd: append.c:326-18794 return from do_append_data() ok=0 *****-sd: dircmd.c:237-18794 Command run requests quit *****-sd: jcr.c:183-18794 write_last_jobs seek to 192 Any help is appreciated. Thank you. Uthra ------------------------------------------------------------------------------ _______________________________________________ Bacula-users mailing list [email protected]<mailto:[email protected]> https://lists.sourceforge.net/lists/listinfo/bacula-users ------------------------------------------------------------------------------ _______________________________________________ Bacula-users mailing list [email protected]<mailto:[email protected]> https://lists.sourceforge.net/lists/listinfo/bacula-users ------------------------------------------------------------------------------ _______________________________________________ Bacula-users mailing list [email protected]<mailto:[email protected]> https://lists.sourceforge.net/lists/listinfo/bacula-users
------------------------------------------------------------------------------
_______________________________________________ Bacula-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/bacula-users
