#
# Default Bacula Storage Daemon Configuration file
#
#  For Bacula release 5.2.12 (12 September 2012) -- redhat Enterprise release
#
# You may need to change the name of your tape drive
#   on the "Archive Device" directive in the Device
#   resource.  If you change the Name and/or the 
#   "Media Type" in the Device resource, please ensure
#   that dird.conf has corresponding changes.
#

Storage {                             # definition of myself
  Name = smhpmblb00-sd
  SDPort = 9103                  # Director's port      
  WorkingDirectory = "/var/bacula/working"
  Pid Directory = "/var/run"
  Maximum Concurrent Jobs = 20
}

# 
# List Directors who are permitted to contact Storage daemon
#
Director {
  Name = smhpmblb00-dir
  Password = "D3DpEd/9I1BKcQN4l0YnpDW5xviAEJyZ0+p3bIz0+3dG"
}

#
# Restricted Director, used by tray-monitor to get the
#   status of the storage daemon
#
Director {
  Name = smhpmblb00-mon
  Password = "smhpmblb00-mon"
  Monitor = yes
}

#
# Note, for a list of additional Device templates please
#  see the directory <bacula-source>/examples/devices
# Or follow the following link:
#  http://bacula.svn.sourceforge.net/viewvc/bacula/trunk/bacula/examples/devices/
#

#
# Devices supported by this Storage daemon
# To connect, the Director's bacula-dir.conf must have the
#  same Name and MediaType. 
#

Device {
  Name = FileStorage
  Media Type = File
  Archive Device = /tmp
  LabelMedia = no;                   # lets Bacula label unlabeled media
  Random Access = Yes;
  AutomaticMount = yes;               # when device opened, read it
  RemovableMedia = no;
  AlwaysOpen = no;
}

#Device {
#  Name = Drive-1                      #
#  Drive Index = 0
#  Media Type = DLT-8000
#  Archive Device = /dev/nst0
#  AutomaticMount = yes;               # when device opened, read it
#  AlwaysOpen = yes;
#  RemovableMedia = yes;
#  RandomAccess = no;
#  AutoChanger = yes
#  #
#  # Enable the Alert command only if you have the mtx package loaded
#  # Note, apparently on some systems, tapeinfo resets the SCSI controller
#  #  thus if you turn this on, make sure it does not reset your SCSI 
#  #  controller.  I have never had any problems, and smartctl does
#  #  not seem to cause such problems.
#  #
#  Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
#  If you have smartctl, enable this, it has more info than tapeinfo 
#  Alert Command = "sh -c 'smartctl -H -l error %c'"  
#}

#Device {
#  Name = Drive-2                      #
#  Drive Index = 1
#  Media Type = DLT-8000
#  Archive Device = /dev/nst1
#  AutomaticMount = yes;               # when device opened, read it
#  AlwaysOpen = yes;
#  RemovableMedia = yes;
#  RandomAccess = no;
#  AutoChanger = yes
#  # Enable the Alert command only if you have the mtx package loaded
#  Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
#  If you have smartctl, enable this, it has more info than tapeinfo 
#  Alert Command = "sh -c 'smartctl -H -l error %c'"  
#}





# 
# Send all messages to the Director, 
# mount messages also are sent to the email address
#
Messages {
  Name = Standard
  director = smhpmblb00-dir = all
}

#####################################################
#####################################################

Autochanger {
  Name = SMC-TS3200                          #ULT3580-TD5
  Device = Drive-1
  Device = Drive-2
  Changer Command = "/etc/bacula/mtx-changer %c %o %S %a %d"
  Changer Device = /dev/sg7
}

Device {
  Name = Drive-1
  Drive Index = 0
  Media Type = LTO-5            # Densidad 0x58
  Archive Device = /dev/nst0
  AutomaticMount = yes;               # when device opened, read it
  AlwaysOpen = yes;
  RemovableMedia = yes;
  RandomAccess = no;
  AutoChanger = yes
  Device Type = Tape;
  LabelMedia = no;
  Alert Command = "sh -c 'smartctl -H -l error %c'"

  Spool Directory = /backup/spool
  Maximum Job Spool Size = 50gb
  Maximum Spool Size = 150gb
#  Spool Size = 250Gb	
}

Device {
  Name = Drive-2
  Drive Index = 1
  Media Type = LTO-5            # Densidad 0x58
  Archive Device = /dev/nst1
  AutomaticMount = yes;               # when device opened, read it
  AlwaysOpen = yes;
  RemovableMedia = yes;
  RandomAccess = no;
  AutoChanger = yes
  Device Type = Tape;
  LabelMedia = no;
  Alert Command = "sh -c 'smartctl -H -l error %c'"

  Spool Directory = /backup/spool
  Maximum Job Spool Size = 50gb
  Maximum Spool Size = 150gb
#  Spool Size = 250Gb
}

