---------- Forwarded message ---------- From: John Drescher <[email protected]> Date: Wed, Apr 13, 2011 at 12:38 PM Subject: Re: [Bacula-users] Dell PowerVault 124T tape drive To: Steffen Fritz <[email protected]>
On Wed, Apr 13, 2011 at 12:37 PM, John Drescher <[email protected]> wrote: > On Wed, Apr 13, 2011 at 7:48 AM, Steffen Fritz <[email protected]> wrote: >> Hey folks, >> >> >> something strange is happening within my bacula configuration. Every help is >> much appreciated! >> >> 1. This is, what bconsole--> status tells me about my tape drive. No pool? >> >> Device "Drive-1" (/dev/nst0) is mounted with: >> Volume: sonntag >> Pool: *unknown* >> Media type: LTO-4 >> Drive 0 status unknown. >> Total Bytes Read=0 Blocks Read=0 Bytes/block=0 >> Positioned at File=0 Block=0 >> ==== >> >> Used Volume status: >> sonntag on device "Drive-1" (/dev/nst0) >> Reader=0 writers=0 devres=0 volinuse=0 >> >> >> >> >> So, I can't update via update, right? How can I add a pool afterwards? >> > > I see this often if no jobs have executed on the loaded tape since it > was loaded. I have found this to be mostly harmless. > Or at least I used to see this. I do not pay much attention to that. John -- John M. Drescher ------------------------------------------------------------------------------ Forrester Wave Report - Recovery time is now measured in hours and minutes not days. Key insights are discussed in the 2010 Forrester Wave Report as part of an in-depth evaluation of disaster recovery service providers. Forrester found the best-in-class provider in terms of services and vision. Read this report now! http://p.sf.net/sfu/ibm-webcastpromo _______________________________________________ Bacula-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/bacula-users
