> What does "mtx status" return?
>
>
Following is the output:
r...@xxx# mtx status
Storage Changer /dev/changer:1 Drives, 8 Slots ( 1 Import/Export )
Data Transfer Element 0:Full (Storage Element 1 Loaded)
Storage Element 1:Empty
Storage Element 2:Full
Storage Element 3:Full
Storage Element 4:Full
Storage Element 5:Full
Storage Element 6:Full
Storage Element 7:Full
Storage Element 8 IMPORT/EXPORT:Full :VolumeTag=LT1001L1
> Does "btape test" pass?
It seems to be Ok:
r...@xxx# ./btape -c /etc/bacula/bacula-sd.conf /dev/nst0
Tape block granularity is 1024 bytes.
btape: butil.c:284 Using device: "/dev/nst0" for writing.
06-Aug 12:25 btape JobId 0: 3301 Issuing autochanger "loaded? drive 0" command.
06-Aug 12:25 btape JobId 0: 3302 Autochanger "loaded? drive 0", result is Slot
btape: btape.c:476 open device "Tape" (/dev/nst0): OK
The Autochanger seems to be functioning Ok as well. :?
+----------------------------------------------------------------------
|This was sent by [email protected] via Backup Central.
|Forward SPAM to [email protected].
+----------------------------------------------------------------------
------------------------------------------------------------------------------
This SF.net email is sponsored by
Make an app they can't live without
Enter the BlackBerry Developer Challenge
http://p.sf.net/sfu/RIM-dev2dev
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
