Hello,
I am trying to configure bacula to use vchanger for offsite backups.
Basically I'd like to be able to swap USB drives every week and take them
offsite. The vchanger howto does not state whether I should run *label
barcodes *for each magazine. Could someone please clarify what operations
should be performed to configure two drives?
bacula-dir.conf relevant config:
Storage {
Name = OffSiteChanger
Address = mfile.merus.local-sd
Password = "snip"
Device = OffSiteChanger
Media Type = File
Autochanger = yes;
}
bacula-sd.conf relevant config:
Autochanger {
Name = OffSiteChanger
Device = OffSiteChanger-drive-0
Device = OffSiteChanger-drive-1
Changer Command = "/usr/local/bin/vchanger %c %o %S %a %d"
Changer Device = "/etc/bacula/removable.conf"
}
#--- drive 0 of the OffSiteChanger autochanger
Device {
Name = OffSiteChanger-drive-0
DriveIndex = 0
Autochanger = yes;
DeviceType = File
MediaType = File
ArchiveDevice = /var/lib/bacula/OffSiteChanger/0/drive0
RemovableMedia = no;
RandomAccess = yes;
}
#--- drive 1 of the OffSiteChanger autochanger
Device {
Name = OffSiteChanger-drive-1
DriveIndex = 1
Autochanger = yes;
DeviceType = File
MediaType = File
ArchiveDevice = /var/lib/bacula/OffSiteChanger/1/drive1
RemovableMedia = no;
RandomAccess = yes;
}# ...
vchanger config:
changer_name = "OffSiteChanger"
work_dir = "/var/lib/bacula/OffSiteChanger"
logfile = "/var/lib/bacula/OffSiteChanger/OffSiteChanger.log"
Virtual_Drives = 1
slots_per_magazine = 4
magazine_bays = 1
automount_dir = /opt/bacula/removable
magazine = "UUID:1125820e-3163-41d0-b571-36818eea5a78"
magazine = "UUID:8a672f1d-9f79-4b68-8260-8285eeb6a1d8"
With this configuration when I unplug one drive, plug in the second drive,
and run *update slots *bacula says this:
*update slots
Automatically selected Catalog: MyCatalog
Using Catalog "MyCatalog"
The defined Storage resources are:
1: File
2: Archive
3: OffSiteChanger
Select Storage resource (1-3): 3
Enter autochanger drive[0]: 1
Connecting to Storage daemon OffSiteChanger at mfile.merus.local-sd:9103 ...
3306 Issuing autochanger "slots" command.
Device "OffSiteChanger" has 4 slots.
Connecting to Storage daemon OffSiteChanger at mfile.merus.local-sd:9103 ...
3306 Issuing autochanger "list" command.
Volume "OffSiteChanger_0002_0001" not found in catalog. Slot=1 InChanger set
to zero.
Volume "OffSiteChanger_0002_0002" not found in catalog. Slot=2 InChanger set
to zero.
Volume "OffSiteChanger_0002_0003" not found in catalog. Slot=3 InChanger set
to zero.
Volume "OffSiteChanger_0002_0004" not found in catalog. Slot=4 InChanger set
to zero.
*
I expected it to link the volumes to the new slots. What am I doing wrong?
Thanks,
Greg
------------------------------------------------------------------------------
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
