Hi,
11.01.2008 00:50, Jerry Lowry wrote:
>
>
> I have been trying to add another tape drive to my server. These are
> not in
>
> an autochanger, they are separate tape drives. I can access the tape
> drive from
>
> Linux with mt and as you will see in the documentation below btape
> worked as
>
> well. But when I try to access the tape from bacula it does not see it.
>
> I thought I had the configuration setup correctly but I must have missing
>
> something. I need another "pair" of eyes to look at the SD and DIR config.
>
>
>
> thanks
>
> -------------------------------------------------------------------
>
> label
>
> The defined Storage resources are:
>
> 1: File
>
> 2: Quantum-DLT-V4
>
> 3: Quantum-DLT-V4-1
>
It shows up here, so I suppose you reloaded the DIR configuration. But...
> 3999 Device "Quantum-DLT-1" not found or could not be opened.
... the SD doesn't know about this device.
> Label command failed for Volume distress-mon0208.
>
> Do not forget to mount the drive!!!
>
>
>
> st stor
>
> The defined Storage resources are:
>
> 1: File
>
> 2: Quantum-DLT-V4
>
> 3: Quantum-DLT-V4-1
>
> Select Storage resource (1-3): 3
>
> Connecting to Storage daemon Quantum-DLT-V4-1 at
> distress.ACCOUNTING.EDT.LOCAL:9103
>
>
>
> distress-sd Version: 2.0.3 (06 March 2007) i686-pc-linux-gnu redhat (Zod)
>
> Daemon started 09-Jan-08 11:52, 11 Jobs run since started.
>
> Heap: bytes=19,491 max_bytes=152,863 bufs=84 max_bufs=103
>
>
>
> Running Jobs:
>
> No Jobs running.
>
> ====
>
>
>
> Jobs waiting to reserve a drive:
>
> ====
>
>
>
> Terminated Jobs:
>
> JobId Level Files Bytes Status Finished Name
>
> ===================================================================
...
> ====
>
>
>
> Device status:
>
> Device "FileStorage" (/backupdb/backup) is not open.
>
> Device "Quantum-DLT" (/dev/nst0) is mounted with
> Volume="distress-010908" Pool="Default"
>
> Total Bytes=32,169,424,896 Blocks=498,657 Bytes/block=64,512
>
> Positioned at File=36 Block=0
>
> ====
You probably didn't restart the SD after the configuration change.
reload only reloads the DIR config, FD and SD have to be restarted
after a configuration change.
...
> bacula-sd.conf
>
>
>
> Device {
>
> Name = Quantum-DLT # First tape – daily and weekly
>
> Drive Index = 0
>
> Media Type = DLT-V4
>
> Archive Device = /dev/nst0
>
> AutomaticMount = no; # when device opened, read it
>
> AlwaysOpen = yes;
>
> RemovableMedia = yes;
>
> RandomAccess = no;
>
> AutoChanger = no
>
>
>
> Device {
>
> Name = Quantum-DLT-1 # Second tape – monthly and
> yearly
>
> Drive Index = 1
>
> Media Type = DLT-V4
>
> Archive Device = /dev/nst1
>
> AutomaticMount = no; # when device opened, read it
>
> AlwaysOpen = yes;
>
> RemovableMedia = yes;
>
> RandomAccess = no;
>
> AutoChanger = no
>
>
>
> ***bacula-dir.conf- storage device section
>
...
> Storage {
>
> Name = Quantum-DLT-V4-1
>
> # Do not use "localhost" here
>
> Address = distress.ACCOUNTING.EDT.LOCAL # N.B. Use a
> fully qualified name here
>
> SDPort = 9103
>
... and it's time to change the passwords :-)
> Device = Quantum-DLT-1 # must be same as Device in Storage
> daemon
>
> Media Type = DLT-V4 # must be same as MediaType in
> Storage daemon
>
> # Autochanger = yes # enable for autochanger device
>
> }
Otherwise, the configuration looks good.
Arno
--
Arno Lehmann
IT-Service Lehmann
www.its-lehmann.de
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
