John,
Thanks for the help. I will looking at the bacula-dev list 2.2.7
should be out any day. It's currently being regression tested. I will
install it once it's out and it the issue happens again.
Thanks -Jason
On Sun, 2007-12-23 at 23:24 -0500, John Drescher wrote:
> On Dec 23, 2007 11:10 PM, Jason A. Kates <[EMAIL PROTECTED]> wrote:
> > Has anybody had this issue where the auto changer is looking for the
> > same tape in two drives?
> >
> > This is part of a normal backup.
> > Bacula Version: 2.2.6 (10 November 2007) x86_64-unknown-linux-gnu redhat
> > Enterprise release.
> >
> > Normaly each drive would be using different tapes
> >
> > Autochanger "Autochanger" with devices:
> > "Drive-1" (/dev/nst0)
> > "Drive-2" (/dev/nst1)
> > Device "Drive-1" (/dev/nst0) is not open.
> > Device is BLOCKED waiting for mount of volume "JX2027L3",
> > Pool: Daily
> > Media type: LTO-3
> > Drive 0 is not loaded.
> > Device "Drive-2" (/dev/nst1) is mounted with:
> > Volume: JX2027L3
> > Pool: Daily
> > Media type: LTO-3
> > Slot 7 is loaded in drive 1.
> > Total Bytes=496,623,458,304 Blocks=473,636 Bytes/block=1,048,534
> > Positioned at File=498 Block=344
> > ====
> >
>
> Yes, I had that a few times. For me this was fixed in the svn code
> (2.3.6) but I here Kern has backported this to the next release of
> 2.2.7 which should be out soon.
>
> John
--
----------------------------------------------------------------------------
Jason A. Kates ([EMAIL PROTECTED])
Fax: 208-975-1514
Phone: 212-400-1670 x2
============================================================================
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
