I think that you're far from an idiot. The IBM driver might be
required going forward for the LTO-4 native tape encryption.
I am glad you're working and if you do get the LTO-4 tape encryption
working please let me know how, hopefully not something that only works
on IBM tape drives as I have HP drives. :-)
-Jason
On Thu, 2007-12-20 at 17:24 +0000, Simon Gray wrote:
> I've realised that i'm an idiot, Ditches the ibm drives, restarted the
> library.
>
> All working now.
>
> Thank you Jason.
>
>
>
> Dec 20 17:12:07 backup lin_taped[3344]: lin_taped terminated.
> Dec 20 17:12:10 backup kernel: lin_tape 1.10.0 is unloaded.
> Dec 20 17:12:27 backup kernel: mptsas: ioc0: removing ssp device,
> channel 0, id
> Dec 20 17:13:30 backup kernel: mptsas: ioc0: attaching ssp device,
> channel 0, id 8, phy 0
> Dec 20 17:13:30 backup kernel: Vendor: IBM Model:
> ULT3580-TD4 Rev: 77B1
> Dec 20 17:13:30 backup kernel: Type:
> Sequential-Access ANSI SCSI revision: 03
> Dec 20 17:13:30 backup kernel: st 6:0:1:0: Attached scsi tape st0
> Dec 20 17:13:30 backup kernel: st0: try direct i/o: yes (alignment 512 B)
> Dec 20 17:13:30 backup kernel: st 6:0:1:0: Attached scsi generic sg2 type 1
> Dec 20 17:13:30 backup kernel: Vendor: IBM Model:
> 3573-TL Rev: 4.40
> Dec 20 17:13:30 backup kernel: Type: Medium
> Changer ANSI SCSI revision: 05
> Dec 20 17:13:30 backup kernel: ch0: type #1 (mt): 0x1+1 [medium transport]
> Dec 20 17:13:30 backup kernel: ch0: type #2 (st): 0x1000+23 [storage]
> Dec 20 17:13:30 backup kernel: ch0: type #3 (ie): 0x10+1 [import/export]
> Dec 20 17:13:30 backup kernel: ch0: type #4 (dt): 0x100+1 [data transfer]
> Dec 20 17:13:30 backup kernel: ch0: dt 0x100: READ ELEMENT STATUS failed
> Dec 20 17:13:30 backup kernel: ch0: INITIALIZE ELEMENT STATUS, may take
> some time ...
> Dec 20 17:13:30 backup kernel: ch0: ... finished
> Dec 20 17:13:30 backup kernel: ch 6:0:1:1: Attached scsi changer ch0
> Dec 20 17:13:30 backup kernel: ch 6:0:1:1: Attached scsi generic sg3 type 8
>
> #btape ULT3580-TD4
>
> all works even with the autochanger part:
>
> === Autochanger test ===
>
> 3301 Issuing autochanger "loaded" command.
> Slot 1 loaded. I am going to unload it.
> 3302 Issuing autochanger "unload 1 0" command.
> unload status=OK 0
> 3303 Issuing autochanger "load 1 0" command.
> 3303 Autochanger "load 1 0" status is OK.
> 20-Dec 17:20 btape: 3301 Issuing autochanger "loaded drive 0" command.
> 20-Dec 17:20 btape: 3302 Autochanger "loaded drive 0", result is Slot 1.
> btape: btape.c:338 open device "ULT3580-TD4" (/dev/st0): OK
> btape: btape.c:1206 Rewound "ULT3580-TD4" (/dev/st0)
> btape: btape.c:1213 Wrote EOF to "ULT3580-TD4" (/dev/st0)
>
> The test autochanger worked!!
>
> //Simon
>
--
----------------------------------------------------------------------------
Jason A. Kates ([EMAIL PROTECTED])
Fax: 208-975-1514
Phone: 212-400-1670 x2
============================================================================
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2005.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
