On 6/1/07, Arno Lehmann <[EMAIL PROTECTED]> wrote:
> Hi,
Thanks for your response, and to the other folks.
> >
> > Storage {
> > Name = DellTL4000
> > Description = "Dell TL4000 Tape Library"
> > Address = 10.1.1.100 # N.B. Use a fully qualified name here
> > SDPort = 9103
> > MediaType = "LTO Autochanger"
> > Device = LTOdrv-1, LTOdrv-2
> Put in the name from the SD here: DellTL4000
> > Autochanger = yes
> > Password = "md5_hash" # passwd for Storage daemon
> > }
In the dir conf, changing the Media Type to LTO-3 and changing to
Device = DellTL4000 fixed things. I ahve another problem with slot
#'s now (it thinks the slots start at 0, but they start with 1), but
at least it's trying to do the right thing.
I also removed the dir entries for the individual tape drives.
> > Also, I found that where bacula-dir *requires* a "MediaType" entry for
> > the autochanger's Storage stanza, the "Autochanger" stanza in
> > bacula-sd throws an error if you include a MediaType entry and the
> > storage daemon will not start. This is an inconsistancy IMO,
>
> I don't think so as it's possible to have an autochanger with drives
> supporting different media types. I doubt anyone runs such a
> configuration, though.
I'm not doubting that, it's just that it's not clear in the
documentation, that's all.
Thanks again for the help folks.
=Nadine=
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
