Hi,
On 5/28/2007 10:12 PM, Doug Breshears wrote:
> Hi,
> I am having trouble getting data spooling to work, is seems like the
> director is completely
> ignoring it because it does not say anything about it, failure or no.
> Below is what I believe
> to be the pertinent data on the system.
> The data is long but I think this is more efficient than trying to drag
> the info out of me one
> question at a time.
>
> I would appreciate any help I can get here if you can spot where I went
> wrong or "drag"
> any more info out of me.
>
> Thanks
> Doug Breshears.
>
>
>
> Example: With Tape in drive, a backup will write directly to tape, no
> data shows up in spool directory, no "spool" references show up in log.
> Example: w/o tape in drive the director says to "please mount Volume
> ..." and the backup waits until tape is inserted and mounted.
>
> Bacula Version: 1.39.30
This is not a released version but a beta version. I strongly recommend
upgrading to 2.0.
> Tape Device: DAT72
> Spool Device: 500GB USB hard drive (mount point /backup)
> Spool Directory: /backup/cache
> Spool Directory attribs: drwxrwxr-x 2 bacula root 4096 2007-05-25 17:38
> /backup/cache/
> Mount Point Attribs: drwxrwx--- 5 bacula root 4096 2007-05-28 10:11 /backup/
Ok, this looks fine. But s your spool device actually mounted to /backup
and has space available?
> Director and Storage Daemons have been restarted several times..
>
>
> Job Definition: (bacula-dir.conf)
> -------------------------
> Job {
> Name = "Ex1"
> JobDefs = "DefaultJob"
> Write Bootstrap = "/var/lib/bacula/Ex1.bsr"
> Type = Backup
> Level = Incremental
> Client = Ex1-fd
> FileSet = "Full Set"
> Storage = DAT-72
> Messages = Standard
> Pool = Default
> Priority = 10
> Spool Data = yes
Good
> }
>
> Device Definition (bacula-sd.conf)
> -----------------------------------------
> Device {
> Name = DAT-72
> Media Type = Tape
> Archive Device = /dev/st0
> AutomaticMount = yes;
> AlwaysOpen = no;
> RemovableMedia = yes;
> RandomAccess = no;
> Maximum Spool Size = 400gb;
> Maximum Job Spool Size = 300gb;
> Spool Directory = /backup/cache;
Ok, these three directives look good.
> #Offline On Unmount = yes;
> ## Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d"
> ## Changer Device = /dev/sg0
> ## AutoChanger = yes
> ## Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
> }
>
>
> Test Job run script...
> ----------------------------------
> [EMAIL PROTECTED]:/usr/local/sbin# cat trun
> cd /etc/bacula
> /usr/bin/bconsole << EOF
> mount storage=DAT-72
> run job=Ex1 pool=Daily level=Incremental yes
> EOF
>
>
> Sample Output Command Line after running test script:
> ----------------------------------------------------------
> [EMAIL PROTECTED]:/etc/bacula# trun
> Connecting to Director Ex1:9101
> 1000 OK: Ex1-dir Version: 1.39.30 (08 December 2006)
> Enter a period to cancel a command.
> mount storage=DAT-72
> Automatically selected Catalog: MyCatalog
> 3001 OK mount. Device="DAT-72" (/dev/st0)
> run job=Ex1 pool=Daily level=Incremental yes
> Job queued. JobId=811
> You have messages.
>
> Message that shows up in bconsole after test script is run
> ------------------------------------------------------------
> 28-May 12:56 Ex1-sd: Please mount Volume "Daily-04" on Storage Device
> "DAT-72" (/dev/st0) for Job Ex1.2007-05-28_12.56.56
The job is not yet running.
When you have Bacula 2.0 setup, and the job actually runs, the output of
'sta sd' will show you if data is spooled; in the top of the output,
there is a line for each job showing what it's doing - spooling,
despooling, or waiting for despooling. At the bottom is a summary of the
space used for spooled data.
Actually, I believe this output is present in 1.39.30, too, but you
would have to mount a usable tape first...
Arno
--
IT-Service Lehmann [EMAIL PROTECTED]
Arno Lehmann http://www.its-lehmann.de
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
