Hi,
On 3/20/2007 1:46 AM, Thomas Arseneault wrote:
>
>
> I have Adic Scalar 24 with dual IBM Ultrium-TD3 (Firmware version 54k1)
> (one drive dedicated to our Windows servers and the other dedicated to
> our Unix systems running Bacula version 2.0.2) which is an LTO-3
> (400/800 GB) drive. I have a 1 (59% used) and a 2 (49% used) Terabyte
> file system that I back up to it. I have tested all the tapes to ensure
> they are good (was able to write cleanly about 600Gb to each with no
> problem outside of bacula) but when I run the backup the first tape goes
> thought just fine (I list media and it shows 600GB someodd on that tape)
> but subsequent tapes (it seem to swap tapes just fine) get the following
> error on them, different size on all the tapes but around 12GB is where
> errors out. I have also included an excerpt from my bacula-sd.conf file
> just in case I screwed up something there. My OS is freebsd 6.1 stable.
> I experienced these same errors with version 1.38, which is why I
> upgraded. I need to know if this is a hardware issue or a bacula issue
> before I call my hardware vendor frothing at the mouth. Any help would
> be appreciated. Let me know if there is any other information you need.
System log entries around the time of the problems?
Operation not permitted sounds either OS related, or a suboptimal
translation from a SCSI problem to the SCSI API of the OS.
I would make sure the HBA and drive setup can work seamless. RAID
adapters for tape drives, for example, are known to cause trouble sometimes.
What HBA do you use?
Arno
>
>
> Tom Arseneault
>
> Network Engineer
>
> Voxify, Inc.
>
>
>
> 19-Mar 09:01 chasm-sd: 3304 Issuing autochanger "load slot 4, drive 0"
> command.
>
> 19-Mar 09:02 chasm-sd: 3305 Autochanger "load slot 4, drive 0", status
> is OK.
>
> 19-Mar 09:02 chasm-sd: 3301 Issuing autochanger "loaded? drive 0" command.
>
> 19-Mar 09:02 chasm-sd: 3302 Autochanger "loaded? drive 0", result is
> Slot 4.
>
> 19-Mar 09:02 chasm-sd: Wrote label to prelabeled Volume "000010" on
> device "AdicScalar24" (/dev/nsa0.0)
>
> 19-Mar 09:02 chasm-sd: New volume "000010" mounted on device
> "AdicScalar24" (/dev/nsa0.0) at 19-Mar-2007 09:02.
>
> 19-Mar 10:02 chasm-sd: chasm.2007-03-17_17.41.49 Error: block.c:569
> Write error at 12:3826 on device "AdicScalar24" (/dev/nsa0.0).
> ERR=Operation not permitted.
>
> 19-Mar 10:06 chasm-sd: chasm.2007-03-17_17.41.49 Error: Error writing
> final EOF to tape. This Volume may not be readable.
>
> dev.c:1687 ioctl MTWEOF error on "AdicScalar24" (/dev/nsa0.0).
> ERR=Input/output error.
>
> 19-Mar 10:06 chasm-sd: End of medium on Volume "000010"
> Bytes=12,246,054,912 Blocks=189,825 at 19-Mar-2007 10:06.
>
> 19-Mar 10:06 chasm-sd: 3307 Issuing autochanger "unload slot 4, drive 0"
> command.
>
>
>
>
>
>
>
>
>
> Device {
>
> Device Type = Tape
>
> Name = AdicScalar24
>
> Media Type = LTO-3
>
> Archive Device = /dev/nsa0.0
>
> AutomaticMount = yes;
>
> AlwaysOpen = yes;
>
> RemovableMedia = yes;
>
> RandomAccess = no;
>
> Changer Command = "/usr/local/etc/bacula/mtx-changer %c %o %S %a %d"
>
> Changer Device = /dev/changer
>
> AutoChanger = yes
>
> Alert Command = "sh -c .tapeinfo -f %c |grep TapeAlert|cat."
>
> # FreeBSD Specific Settings
>
> Offline On Unmount = no
>
> Hardware End of Medium = no
>
> BSF at EOM = yes
>
> Backward Space Record = no
>
> Fast Forward Space File = no
>
> TWO EOF = yes
>
> }
>
>
>
> #
>
> # An autochanger device with two drives
>
> #
>
> Autochanger {
>
> Name = Scalar24
>
> Device = AdicScalar24
>
> Changer Command = "/usr/local/etc/bacula/mtx-changer %c %o %S %a %d"
>
> Changer Device = /dev/changer
>
> }
>
>
> ------------------------------------------------------------------------
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share your
> opinions on IT & business topics through brief surveys-and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Bacula-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/bacula-users
--
IT-Service Lehmann [EMAIL PROTECTED]
Arno Lehmann http://www.its-lehmann.de
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
