Torsdag 01 marts 2007 21:36 skrev Simon Ekstrand:
> Hi,
>
> [resend to the list due to wrong sender address, sorry if this arrives
> twice]
>
> Kern Sibbald skrev:
> > Hello,
> >
> >>From what you have described here, it appears that Bacula is recycling a
> >
> > volume while it is being used or has been reserved for use. I am not
> > sure what is going on for the following reasons:
> >
> > 1. You speak of rotation of volumes, but there is no such concept in
> > Bacula. I am assuming you mean recycling of volumes. Please try to use
> > the right terminology as it helps ensure proper understanding.
>
> Sorry about the lack of proper terminology. No, I don't mean recycling,
> I mean when bacula switches from one Volume in a pool to the next, ie.
> what happens when 'Volume Use Duration' is reached for a volume. I'm not
> sure if that particular concept has a name.
>
> > 2. It appears that you are using Volume retention periods to attempt to
> > force Bacula to use a different volume. This absolutely will not work.
> > It is probably the main reason you are having problems.
>
> Sorry for the misunderstanding, no that's not what I'm trying to do.
Maybe not, but I think that is what your configuration does
> A typical sample pool definition we're using:
>
> Pool {
> Name = Default-Windows-94
> Pool Type = Backup
> Recycle = yes
> AutoPrune = yes
> Volume Retention = 7 days
> Volume Use Duration = 23h
> LabelFormat = "Vol-windows-94"
> }
You need to set a Maximum Volume Size in order for Bacula to "rotate" or
recycle volumes properly, like:
Pool {
Name = Default
LabelFormat = "Def"
Pool Type = Backup
Recycle = yes
AutoPrune = yes
Volume Retention = 8 days
Volume Use Duration = 12 hours
Accept Any Volume = yes
Recycle Oldest Volume = yes
Maximum Volume Bytes = 2 gb
}
I use 2 GB, but you can of course go higher, but keep it small enough that
your following scenario won't happen
>
> The problem we're encountering is when:
> * Job A starts running.
> * 'Volume Use Duration' is reached.
This one shouldn't happen, MaxVol should be reached before 'Vol Use Duration'
> * Job B starts running but fails due to A still running and writing to
> the old volume, preventing the new volume from being used.
> * Job C, D, E have the same problem as B.
> * Job A finishes.
> * Job F starts running, the new volume is used since the old volume is
> no longer being written to, so job G succeeds.
> * Job G, H, I succeed.
>
> > 3. Normally if Bacula recycles a volume while jobs are using it, you have
> > an important configuration inconsistency (retention periods, not setting
> > reasonable volume sized, ...)
>
> Yepp, I understand that.
>
> > 4. A proper solution to your problem is to set explicit maximum volume
> > sizes and then ensure that your volume retention period will not occur
> > while jobs are writing to the volume.
>
> As far as i can tell we've got that much covered with the 'volume use
> duration' and 'volume retention' settings in the pool above. If full
> configuration files would help I'll be happy to anonymize them where
> necessary and post them tomorrow.
>
> Regards,
--
Regards
Steen
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
