On 11 Jan 2007 at 22:05, Thomas Glatthor wrote:
> Dan Langille schrieb:
> > I'm setting up a NEO 2000, and I'm seeing this:
> >
> > $ sudo /usr/local/sbin/btape -c /usr/local/etc/bacula-sd.conf
> > /dev/nsa0
> > Tape block granularity is 1024 bytes.
> > btape: butil.c:286 Using device: "/dev/nsa0" for writing.
> > 11-Jan 15:37 btape: 3301 Issuing autochanger "loaded? drive 0"
> > command.
> > 11-Jan 15:37 btape: 3302 Autochanger "loaded? drive 0", result is
> > Slot 1.
> > 11-Jan 15:37 btape: 3301 Issuing autochanger "loaded? drive 0"
> > command.
> > 11-Jan 15:37 btape: 3302 Autochanger "loaded? drive 0", result is
> > Slot 1.
> > btape: btape.c:368 open device "NEO 2000" (/dev/nsa0): OK
> > *
> >
> > Should I be concerned about that "loaded?" string? I've never seen
> > that question mark before.
> >
> > $ bconsole -c /usr/local/etc/bconsole.conf
> > Connecting to Director system100.example.com:9101
> > 1000 OK: system100-dir Version: 2.0.0 (04 January 2007)
> > Enter a period to cancel a command.
> > *update slots
> > Automatically selected Catalog: MyCatalog
> > Using Catalog "MyCatalog"
> > The defined Storage resources are:
> > 1: File
> > 2: NEO
> > Select Storage resource (1-2): 2
> > Connecting to Storage daemon NEO at system100.example.com:9103 ...
> > 3306 Issuing autochanger "slots" command.
> > Device "NEO 2000" has 0 slots.
> > No slots in changer to scan.
> > *
> >
> > What? no slots? but....
> >
> > $ sudo /usr/local/sbin/rc-chio-changer /dev/ch0 slots
> > 29
> >
> > $ grep Changer /usr/local/etc/bacula-sd.conf
> > Changer Command = "/usr/local/sbin/rc-chio-changer %c %o %S %a %d"
> > Changer Device = /dev/ch0
> >
> > Clues? Ideas? Thanks.
> i never noticed the ? in 1.38, but with 2.0.0 and ? it is still working....
According to the changelog, it came in with version 2.0.0
>
> /dev/nsa0 == freebsd?
Yes.
> for solaris i have to change one line in the mtx-changer-script to have slots
> in my neo.
>
> from
> > cat ${TMPFILE} | grep " *Storage Element [0-9]*:.*Full" | awk "{print \$3
> > \$4}" | sed "s/Full *\(:VolumeTag=\)*//
> to
> > cat ${TMPFILE} | grep " *Storage Element [0-9]*:.*Full" | awk "{print \$3
> > \$4}" | sed "s/Full:VolumeTag=//"
It was very hard to see the changes there. It looks like you removed
the (...) at the end.
> after that i have a lot of slots in my changer :)
>
> it looks like sed is not working identically on linux and solaris
My issue has been fixed. It was a permissions issue. We did this:
chmod g+rw /dev/ch0 <= the changer
There are several places that need permission checked when setting
up Bacula:
/dev/nsa0 <= tape drive
/dev/ch0 <= the changer
/usr/local/sbin/rc-chio-changer (or whatever one uses for
autochanging)
/bin/chio (if you are using that)
Really, the best thing to do is this test AS the bacula user via
something like
su or sudo...
--
Dan Langille : Software Developer looking for work
my resume: http://www.freebsddiary.org/dan_langille.php
PGCon - The PostgreSQL Conference - http://www.pgcon.org/
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
