On Fri, 6 Oct 2006, Kern Sibbald wrote:
> You might start by looking at the test named
> 2drive-incremental-2tape, which does test multiple drive usage.
> Also, I would recommend that you attempt to reproduce the problem
> on a two drive autochanger, otherwise, I won't be able to use the
> test unless you send me both the test and a four drive
> autochanger.
I reconfigured for a two drive system.
> Even more ideal would be to duplicate the test using my
> autochanger simulator, where you can have up to 10 drives. For
> example, see the test 2drive-incremental-2disk. I suspect that
> you should be able to reproduce it with this script, but it is an
> autochanger simultor, so there are possible subtle differences.
>
> Another approach would be to demonstrate the problem on a 4 drive
> tape autochanger, then modify it to use my simulator, and if that
> shows the problem you can avoid sending me a four drive
> autochanger, since I lack space to for installing it :-)
I ran 2drive-incremental-2tape tonight on my hardware and it failed
with a 3903 error if I recall correctly. I also ran the same test
with 2drive-incremental-2disk and it ran successfully.
I've posted the failure of 2drive-incremental-2tape in the bug
tracker. I included the autoloader and drive configuration in the
uploaded files as well as the ./tmp logfiles that seemed in any way
important. Now that I can easily run the tests I will be happy to
run them again when you wish. Thanks again; this must be close. :)
-- Michael
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
