|
I’m getting the following error when I try to put a
second full backup onto tape. Where do I need to start do diagnose the problem? 05-Oct 16:06 athos-sd: FullBackup.2006-10-05_14.32.09 Error:
Unable to position to end of data on device "Drive-1"
(/dev/rmt/1cbn): ERR=dev.c:1298 read error on "Drive-1"
(/dev/rmt/1cbn). ERR=I/O error. 05-Oct 16:06 athos-sd: Marking Volume "EJB065" in
Error in Catalog. The tape device settings are based on Dan Langille’s
article. I’m also still getting : 05-Oct 16:07 athos-sd: Invalid slot=0 defined, cannot
autoload Volume. Messages when bacula tries to autoload the next tape. Here’s the configuration; Solaris 10 x86 w/ reasonably current patch cluster Bacula 1.39.22 Compaq/HP TL892 library, 2 x TZ89 (DLT8000) drives mtx 1.3.9 mtx-changer modified to parse “list” correctly
and mt output for wait_for_drive bacula-dir.conf: Storage { Name = TL800 Address = labtape.ruckus.com SDPort = 9103 Password =
"27txx87d0BHagkpOSO9VkgpW4qGj0g7j3Yiygth2Q"
# password for Storage daemon Device = TL800 Media Type = DLT-8000 Autochanger = yes } Autochanger { Name = TL800 Device = Drive-0, Drive-1 Changer Command = "/opt/bacula/bin/mtx-changer
%c %o %S %a %d" Changer Device = /dev/changer } Device { Name =
Drive-0
# Drive Index = 0 Media Type = DLT-8000 Archive Device = /dev/rmt/0cbn AutomaticMount =
yes;
# when device opened, read it AlwaysOpen = yes; RemovableMedia = yes; RandomAccess = no; AutoChanger = yes Changer Command = "/opt/bacula/bin/mtx-changer
%c %o %S %a %d" Changer Device = /dev/changer # Enable the Alert command only if you have the mtx
package loaded Alert Command = "sh -c 'tapeinfo -f %c |grep
TapeAlert|cat'" Offline On Unmount = no Hardware End of Medium = no BSF at
EOM
= yes Backward Space Record = no Fast Forward Space File = no TWO
EOF
= yes LabelMedia =
yes;
# lets Bacula label unlabeled media } Device { Name =
Drive-1
# Drive Index = 1 Media Type = DLT-8000 Archive Device = /dev/rmt/1cbn AutomaticMount =
yes;
# when device opened, read it AlwaysOpen = yes; RemovableMedia = yes; RandomAccess = no; AutoChanger = yes Changer Command = "/opt/bacula/bin/mtx-changer
%c %o %S %a %d" Changer Device = /dev/changer # Enable the Alert command only if you have the mtx
package loaded Alert Command = "sh -c 'tapeinfo -f %c |grep
TapeAlert|cat'" Offline On Unmount = no Hardware End of Medium = no BSF at
EOM
= yes Backward Space Record = no Fast Forward Space File = no TWO
EOF
= yes LabelMedia =
yes;
# lets Bacula label unlabeled media } Alan Davis Senior Architect Ruckus Network, Inc. 703.464.6578 (o) 410.365.7175 (m) [EMAIL PROTECTED] alancdavis AIM |
------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________ Bacula-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/bacula-users
