Hi all,
I have a robotic library Storagetek L40 with twho drives Ultrium LTO 2.
In my server I have a network card scsii. I have Red Hat Advanced Server 3.0
With this scsii I have connected the robot as the two drives in such a
way that the first drive is /dev/nst0 0 and the second is /dev/nst0 1.
I use this commands for example:
/bacula/etc/mtx-changer / dev/sg2 loaded 0 / dev/nst1 0
and for the other one
/bacula/etc/mtx-changer / dev/sg2 loaded 0 / dev/nst1 1
I don't know as configuring this in the bacula-sd.conf so that it works.
Can they help me?
Thank you
My bacula-sd.conf is configured this way:
#
# An autochanger device with two drives
#
Autochanger {
Name = STK-L40
Device = STK-L40-1, STK-L40-2
Changer Command = "/bacula/etc/mtx-changer %c %o %S %a %d"
Changer Device = /dev/sg2
}
Device {
Name = STK-L40-1
Drive Index = 0
Media Type = Ultrium2
Archive Device = /dev/nst1
AutomaticMount = yes;
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
AutoChanger = yes
}
Device {
Name = STK-L40-2
Drive Index = 1
Media Type = Ultrium2
Archive Device = /dev/nst1
AutomaticMount = yes;
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
AutoChanger = yes
}
--
+-----------------------------^------------------------+
| email: [EMAIL PROTECTED] ^ Pedro Sepúlveda |
| http://www.uco.es/~cc0semop ^ Cordoba (SPAIN) |
+-----------------------------^------------------------+
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
