Good Day,
As I left the group yesterday, I"d sent in a few conf files and a list
of volumes. The responses I got yesterday were helpful in sheding some
light on this program. I made some progress this morning, actually
got an incremental backup done. I went to the data center, umounted
and ejected - then reloaded - remounted all of the tapes in the drive:
Product Type: Medium Changer
Vendor ID: 'DELL '
Product ID: 'PV-122T '
Revision: 'K17r'
Attached Changer: No
So after months of apparent errors, one job finally went right:
Terminated Jobs:
JobId Level Files Bytes Status Finished Name
======================================================================
4992 Incr 0 0 Error 31-Jul-06 13:27 ux-nfs01-atl-02
4993 Incr 0 0 Error 05-Aug-06 20:28 ux-bck01-atl-02
4994 Incr 0 0 Error 11-Aug-06 03:30 phishprint2
4995 Incr 0 0 Error 16-Aug-06 10:46 phishprint
4996 Incr 0 0 Error 21-Aug-06 18:46 radardev
4997 Incr 0 0 Error 27-Aug-06 01:47 datamine1
4998 Incr 0 0 Cancel 28-Aug-06 19:07 ux-crep01-atl-02
4999 Incr 0 0 Error 03-Sep-06 02:08 tsbackend2
5558 Full 0 0 Error 08-Sep-06 09:24 taurus
5000 Incr 10,405 815,794,088 OK 13-Sep-06 08:33 tsbackend1
However, when I tried to kick off another I got the following in messages
*messages
13-Sep 09:33 bacula-atl2-dir: tsbackend1.2006-07-26_00.00.08 Fatal
error: Network error with FD during Backup: ERR=Connection reset by
peer
13-Sep 09:33 bacula-atl2-dir: tsbackend1.2006-07-26_00.00.08 Fatal
error: No Job status returned from FD.
13-Sep 09:33 bacula-atl2-dir: Bacula 1.36.3 (22Apr05): 13-Sep-2006 09:33:45
JobId: 5000
Job: tsbackend1.2006-07-26_00.00.08
Backup Level: Incremental, since=2006-05-10 09:44:02
Client: tsbackend1-fd
FileSet: "backend fs" 2005-11-26 00:31:35
Pool: "Inc_A"
Storage: "ATL2-TAPE1"
Start time: 08-Sep-2006 10:23:18
End time: 13-Sep-2006 09:33:45
FD Files Written: 0
SD Files Written: 10,405
FD Bytes Written: 0
SD Bytes Written: 815,794,088
Rate: 0.0 KB/s
Software Compression: None
Volume name(s): test_kc_13sept
Volume Session Id: 25
Volume Session Time: 1153811541
Last Volume Bytes: 816,844,341
Non-fatal FD errors: 21
SD Errors: 0
FD termination status: Error
SD termination status: OK
Termination: Backup Canceled
13-Sep 09:33 bacula-atl2-dir: Start Backup JobId 5559,
Job=ux-nfs01-atl-02.2006-08-28_00.00.00
13-Sep 09:25 ux-nfs01-atl-02-fd: DIR and FD clocks differ by -475
seconds, FD automatically adjusting.
13-Sep 09:34 bacula-atl2-sd: Job ux-nfs01-atl-02.2006-08-28_00.00.00
waiting. Cannot find any appendable volumes.
Please use the "label" command to create a new Volume for:
Storage: ATL2-TAPE1
Media type: LTO2
Pool: Inc_B
13-Sep 09:34 bacula-atl2-dir: ux-nfs01-atl-02.2006-08-28_00.00.00
Error: message.c:668 Operator mail program terminated in error.
CMD=/sbin/bsmtp -h mail0.ciphertrust.com -f "(Bacula-ATL2)
[EMAIL PROTECTED]" -s "Bacula-ATL2: Intervention needed for
ux-nfs01-atl-02.2006-08-28_00.00.00" [EMAIL PROTECTED]
ERR=Child exited with code 1
So I tried the label command:
*label
Automatically selected Storage: ATL2-TAPE1
Enter new Volume name: 13Sept_Slot8
Enter slot (0 for none): 8
Defined Pools:
1: Default
2: Full_A
3: Diff_A
4: Inc_A
5: FileSys
6: Full_B
7: Diff_B
8: Inc_B
9: Diff_C
10: Inc_C
11: Full_C
12: Archive
13: Catalog
14: Full_Pool
15: DB
Select the Pool (1-15): 8
Connecting to Storage daemon ATL2-TAPE1 at 192.168.69.200:9103 ...
Sending label command for Volume "13Sept_Slot8" Slot 8 ...
3301 Issuing autochanger "loaded drive 0" command.
3302 Autochanger "loaded drive 0", result is Slot 1.
3303 Issuing autochanger "unload slot 1, drive 0" command.
3304 Issuing autochanger "load slot 8, drive 0" command.
3305 Autochanger "load slot 8, drive 0", status is OK.
3911 Cannot label Volume because it is already labeled: "000102"
Label command failed for Volume 13Sept_Slot8.
Do not forget to mount the drive!!!
Now it may be that I just don't understand the steps of this software,
I've attempted the chapter "A Brief Tutorial" in the manual but since
this is a live environment and I don't have a test environment to hack
around in, I'm worried about 'breaking' something. There were critical
changes made to a server today and the backups must be done (lest we
have hundreds of customers angry with us should something go bad)
What steps should I take from here, and in the future, to correct this issue?
Best Regards,
-Keith
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
