Thanks for your reply.
I've already installer and heavily tested the tapeloader with bacula.
I've done lots of backups to tape. All worked ok.
Then I went on vacation, and when I came I was getting this error.
I cant figure out what happened.
Maybe the tape went on vacations too :P
Jaime
Uwe Schuerkamp wrote:
> On Tue, Sep 05, 2006 at 10:54:43AM +0100, Jaime Ventura wrote:
>
>> From: Jaime Ventura <[EMAIL PROTECTED]>
>> To: Arno Lehmann <[EMAIL PROTECTED]>
>> Cc: Bacula Users <[email protected]>
>> Date: Tue, 05 Sep 2006 10:54:43 +0100
>> Subject: Re: [Bacula-users] Bad response to Append Data command
>>
>> Arno Lehmann,
>> Thanks for you reply.
>> Im using RHEL 4 x86_64 with a dell powervault 124T.
>> Im using bacula for some time backing up to disk.
>> Now i bought a a dell powervault 124T so i can make backups to tape.
>> So, im newbe to tape issues.
>> Im on a test environment... making tests :P.
>>
>> When you say «Have you run btape on that device?», what is the purpose?
>> test the tape? write a EOF?
>>
>> Cant get much info on status:
>>
>>
>> *mount
>> The defined Storage resources are:
>> 1: File
>> 2: IBM-Ultrium-3
>> 3: TapeLoader124T
>> Select Storage resource (1-3): 3
>> 3301 Issuing autochanger "loaded drive 0" command.
>> 3302 Autochanger "loaded drive 0", result: nothing loaded.
>> 3001 Mounted Volume: 000001L3
>> 3001 Device "IBM-Ultrium-3" (/dev/nst0) is already mounted with Volume
>> "000001L3"
>> *
>> *status sd=TapeLoader124T
>> Connecting to Storage daemon TapeLoader124T at 10.0.23.17:9103
>>
>> localhost-sd Version: 1.38.11 (28 June 2006) x86_64-redhat-linux-gnu
>> redhat Enterprise release
>>
>> Daemon started 28-Aug-06 14:48, 30 Jobs run since started.
>>
>> Running Jobs:
>> No Jobs running.
>> ====
>>
>>
>> Jobs waiting to reserve a drive:
>>
>> ====
>>
>> Terminated Jobs:
>> JobId Level Files Bytes Status Finished Name
>> ======================================================================
>> 498 Full 0 0 Error 05-Sep-06 09:40 jtgv-gsi
>> 498 Full 0 0 Error 05-Sep-06 09:43 jtgv-gsi
>> 498 Full 0 0 Error 05-Sep-06 09:45 jtgv-gsi
>> 498 Full 0 0 Error 05-Sep-06 09:48 jtgv-gsi
>> 498 Full 0 0 Error 05-Sep-06 09:50 jtgv-gsi
>> 498 Full 0 0 Error 05-Sep-06 09:52 jtgv-gsi
>> 498 Full 0 0 Error 05-Sep-06 09:55 jtgv-gsi
>> 498 Full 0 0 Error 05-Sep-06 09:57 jtgv-gsi
>> 498 Full 0 0 Error 05-Sep-06 09:59 jtgv-gsi
>> 498 Full 0 0 Error 05-Sep-06 10:02 jtgv-gsi
>> ====
>>
>>
>> Device status:
>> Autochanger "TapeLoader124T" with devices:
>> "IBM-Ultrium-3" (/dev/nst0)
>> Device "FileStorage" (/backupspace/bacula) is not open or does not exist.
>> Device "IBM-Ultrium-3" (/dev/nst0) is mounted with Volume="000001L3"
>> Pool="TapePoolForSERVERS"
>> Drive 0 is not loaded.
>> Total Bytes Read=64,512 Blocks Read=1 Bytes/block=64,512
>> Positioned at File=0 Block=0
>> ====
>> In Use Volume status:
>> 000001L3 on device "IBM-Ultrium-3" (/dev/nst0)
>> ====
>>
>> How do I make that tape appendable again?
>>
>> Again, thanks for you help
>>
>>
>
> Hi,
>
> you need to run btape to ensure compatibility with your tape library /
> tape drive. First, you'll need to find out which scsi generic device
> represents your changer device (probably /dev/sg1, dependent on the
> scsi id you've configured for the changer).
>
> Unless you tell Bacula where your tape changer is, it won't be able to
> load other tapes using mtx.
>
> Here's an example from our setup:
>
> Autochanger {
> Name = Overland
> Device = DLT8000
> Changer Command = "/server/bacula/etc/mtx-changer %c %o %S %a %d"
> Changer Device = /dev/changer
> }
>
> Where /dev/changer is a symlink to the generic scsi device:
>
> /dev/changer -> /dev/sg6
>
> and /proc/scsi/scsi has the following entry:
>
> Host: scsi1 Channel: 00 Id: 05 Lun: 01
> Vendor: HP Model: 1x8 autoloader Rev: 1.46
> Type: Medium Changer ANSI SCSI revision: 03
>
>
> HTH, uwe
>
>
>
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
