On Monday 21 November 2005 22:46, Cedric Charest wrote:
> Cool, thanks a lot!
> It fixed my problem!
Thanks for the confirmation. By the way, did you apply the whole patch or
just the single file?
>
>
> Cédric Charest
> Administrateur de Systèmes / System Administrator
> Terrascale Technologies Inc.
>
> Kern Sibbald wrote:
> > You ran into a bug in 1.38.x that causes the Director to incorrectly
> > handle Pool names containing spaces. Bug #492 has a patch file that will
> > add all current patches to 1.38.1 generating 1.38.2. Note, this patch
> > file is preliminary because there may be additional changes before the
> > 1.38.2 release.
> >
> > If you only want to fix the current problem, look at the patch for
> > src/dird/catreq.c. That part of the patch file contains a one line
> > addition that fixes your bug ...
> >
> > On Monday 21 November 2005 18:49, Cedric Charest wrote:
> >>Hello!
> >>
> >>I'm trying to configure Bacula for our backups at work with an Exabyte
> >>Packetloader 1x10 80/160 changer/tape backup.
> >>
> >>The changer is supported and everything, but I'm having a weird problem.
> >>
> >>Each time I start a job, I get this:
> >>
> >>--------------
> >>18-Nov 23:05 newt-sd: Job Newt_Incremental.2005-11-18_23.05.00 waiting.
> >>Cannot find any appendable volumes.
> >>Please use the "label" command to create a new Volume for:
> >> Storage: "Exabyte VXA2 Drive" (/dev/nst0)
> >> Media type: VXA-2
> >> Pool: Tapes Pool
> >>--------------
> >>
> >>BUT, all my tapes were labeled with a "label barcodes" and are
> >> appendable: --------------
> >>list media
> >>Pool: Tapes Pool
> >>
> >>| MediaId | VolumeName | VolStatus | VolBytes | VolFiles | VolRetention
> >>| Recycle | Slot | InChanger | MediaType | LastWritten |
> >>
> >>+---------+------------+-----------+----------+----------+--------------+
> >>-- -------+------+-----------+-----------+---------------------+
> >>
> >>| 41 | A0000001 | Append | 1 | 0 | 1,814,400
> >>| 1 | 1 | 1 | VXA-2 | 0000-00-00 00:00:00 |
> >>| 42 | A0000002 | Append | 1 | 0 | 1,814,400
> >>| 1 | 2 | 1 | VXA-2 | 0000-00-00 00:00:00 |
> >>| 43 | A0000003 | Append | 1 | 0 | 1,814,400
> >>| 1 | 3 | 1 | VXA-2 | 0000-00-00 00:00:00 |
> >>| 44 | A0000004 | Append | 1 | 0 | 1,814,400
> >>| 1 | 4 | 1 | VXA-2 | 0000-00-00 00:00:00 |
> >>| 45 | A0000005 | Append | 1 | 0 | 1,814,400
> >>| 1 | 5 | 1 | VXA-2 | 0000-00-00 00:00:00 |
> >>| 46 | A0000006 | Append | 1 | 0 | 1,814,400
> >>| 1 | 6 | 1 | VXA-2 | 0000-00-00 00:00:00 |
> >>| 47 | A0000007 | Append | 1 | 0 | 1,814,400
> >>| 1 | 7 | 1 | VXA-2 | 0000-00-00 00:00:00 |
> >>| 48 | A0000008 | Append | 1 | 0 | 1,814,400
> >>| 1 | 8 | 1 | VXA-2 | 0000-00-00 00:00:00 |
> >>| 49 | A0000009 | Append | 1 | 0 | 1,814,400
> >>| 1 | 9 | 1 | VXA-2 | 0000-00-00 00:00:00 |
> >>| 50 | A0000010 | Append | 1 | 0 | 1,814,400
> >>| 1 | 10 | 1 | VXA-2 | 0000-00-00 00:00:00 |
> >>
> >>+---------+------------+-----------+----------+----------+--------------+
> >>-- -------+------+-----------+-----------+---------------------+
> >> --------------
> >>
> >>An "st st" gives me:
> >>--------------
> >>Device status:
> >>Autochanger "Exabyte VXA2 Packetloader 1x10" with devices:
> >> "Exabyte VXA2 Drive" (/dev/nst0)
> >>Device "DiskStorage" (/mnt/archive) is not open or does not exist.
> >>Device "Exabyte VXA2 Drive" (/dev/nst0) is mounted with Volume "A0000001"
> >> Slot 1 is loaded in drive 0.
> >> Total Bytes Read=64,512 Blocks Read=1 Bytes/block=64,512
> >> Positioned at File=0 Block=0
> >>====
> >>
> >>In Use Volume status:
> >>A0000001 on device "Exabyte VXA2 Drive" (/dev/nst0)
> >>====
> >>--------------
> >>
> >>If I try to label a tape with another name, it says it's already labeled
> >>as A0000001, as an example.
> >>
> >>My bacula-sd.conf looks like this:
> >>
> >>--------------
> >>Device {
> >> Name = Disk Storage
> >> Media Type = File
> >> Archive Device = /mnt/archive
> >> LabelMedia = yes; # lets Bacula label unlabeled media
> >> Random Access = Yes;
> >> AutomaticMount = yes; # when device opened, read it
> >> RemovableMedia = no;
> >> AlwaysOpen = no;
> >>}
> >>
> >>Autochanger {
> >> Name = "Exabyte VXA2 Packetloader 1x10"
> >> Device = "Exabyte VXA2 Drive"
> >> Changer Command = "/usr/local/bacula/etc/mtx-changer %c %o %S %a %d"
> >> Changer Device = /dev/sg1
> >>}
> >>
> >>Device {
> >> Name = "Exabyte VXA2 Drive"
> >> Media Type = VXA-2
> >> Archive Device = /dev/nst0
> >> AutomaticMount = yes;
> >> AlwaysOpen = yes;
> >> RemovableMedia = yes;
> >> RandomAccess = no;
> >> AutoChanger = yes
> >> Changer Command = "/usr/local/bacula/etc/mtx-changer %c %o %S %a %d"
> >> Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
> >> Changer Device = /dev/sg1
> >>}
> >>--------------
> >>
> >>Any help would be greatly appreciated!
> >>
> >>Thanks!
--
Best regards,
Kern
(">
/\
V_V
-------------------------------------------------------
This SF.Net email is sponsored by the JBoss Inc. Get Certified Today
Register for a JBoss Training Course. Free Certification Exam
for All Training Attendees Through End of 2005. For more info visit:
http://ads.osdn.com/?ad_idv28&alloc_id845&op=click
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
