My system has one internal VXA-1 and an external RakPak, with two VXA-1 drives.
In earlier experiments with Bacula, all drives were available and had been
successfully used, at least to lable tapes, if not to run backup jobs.
I began experiencing difficulties with Bacula using one of the RakPak drives.
Since then I have replaced SuSE ES 9.1 with RH 9.0, but the problem persists.
If I try to mount a tape in the left drive on the RakPak, here is what Bacula
tells me:
Using default Catalog name=MyCatalog DB=bacula
3999 Device "LeftDrive" not found
Here are the pertinent parts of bacula-sd.conf and bacula-dir.conf:
SD --
Device {
Name = LeftDrive
Media Type = VXA-1
Archive Device = /dev/nst1
AutomaticMount = yes;
AlwaysOpen = yes;
RemovableMedia = yes;
RandomAccess = no;
}
DIR --
Storage {
Name = Left
Address = lbackup
SDPort = 9103
Password = "[here is the password]"
Device = LeftDrive
Media Type = VXA-1
}
The InternalDrive and RightDrive, both of which work, are defined in the SD
just like the LeftDrive, except that they have different names and use
/dev/nst0 and /dev/nst2, respectively. Upon examination, I discovered that the
line "Name = LeftDrive" did not end at the "e", but had a trailing space, so I
removed it, then stopped Bacula and re-started it. It didn't make any
difference.
Tks n rgds,
Richard White CNE6
Network Engineer
Mason County, Washington
360-427-5501
[EMAIL PROTECTED]
-------------------------------------------------------
This SF.Net email is sponsored by the 'Do More With Dual!' webinar happening
July 14 at 8am PDT/11am EDT. We invite you to explore the latest in dual
core and dual graphics technology at this free one hour event hosted by HP,
AMD, and NVIDIA. To register visit http://www.hp.com/go/dualwebinar
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
