Hi! It's me again :)
I created enviorment in wich I have two pools. One runs on w01, w03,
w05, etc, and other on w02, w04, w06, etc. Cataloge backup run after
each backup.
The problem I'm dealing with this month is:
Job Parni.2005-04-20_23.00.00 waiting. Cannot find any appendable
volumes. Please use the "label" command to create a new Volume
So, all the Volumes marked as Append or Empty have been used and there
are only Full Volumes. I have bacula-dir.conf [snip] set like this:
Pool {
Name = Parni
Pool Type = Backup
Recycle = yes
AutoPrune = yes
Volume Retention = 6 days
Accept Any Volume = no
Recycle Oldest Volume = yes
}
for both pools. Bacula director works fine (if anyone needs,
configuration for HP SureStore Ultrium is this) with conf like this:
Device {
Name = Ultrium
Media Type = Ultrium
Archive Device = /dev/nst0
AutomaticMount = no;
AlwaysOpen = no;
Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d"
Changer Device = /dev/sg2
AutoChanger = yes
Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'"
}
What am I missing? I would like it to take oldest Volume or/and to mark
Volumes older than 6 days as Purged/Recycle.
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bacula-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-users
