I suggest you turn on debug level say 200 or 400 in the storage daemon. That
will give you a lot more information on why it is failing (probably
permissions problems).
Regards,
Kern
On Monday 09 March 2009 08:52:27 Tomasz Westrych wrote:
> Hi,
>
> I've posted alredy on Bacula-user list but have no reply yet so mabye some
> of you can look at my config and tell if there is some mistake.
>
> We use serwer_bacula Version: 2.5.12 (07 October 2008).
>
> Problem is with autochanger and mounting volumes, when I want to mount
> volumes with bconsole I get "Device not found or could not be opened". I
> have 4 drives and problem is with 4: VTS-Robot_arch 5: VTS-Robot_arch2.
> When I start backup job with 4: VTS-Robot_arch or 5: VTS-Robot_arch2 it
> works fine autochanger loads volumes, mount and umounts etc.
>
> Manualy mounting is impossible.
>
> *mo
> The defined Storage resources are:
> 1: File
> 2: VTS-Robot
> 3: VTS-Robot2
> 4: VTS-Robot_arch
> 5: VTS-Robot_arch2
> Select Storage resource (1-5): 4
> Enter autochanger slot: 0
> 3999 Device "robotarch" not found or could not be opened.
>
> *mo
> Automatically selected Catalog: MyCatalog Using Catalog "MyCatalog"
> The defined Storage resources are:
> 1: File
> 2: VTS-Robot
> 3: VTS-Robot2
> 4: VTS-Robot_arch
> 5: VTS-Robot_arch2
> Select Storage resource (1-5): 5
> Connecting to Storage daemon VTS-Robot_arch2 at serwer_bacula:9103 ...
> Enter autochanger slot: 1
> 3999 Device "robotarchdrugi" not found or could not be opened.
>
>
>
> bacula-sd.conf:
>
> Autochanger {
> Name = robot
> Device = Drive-1
> Changer Command = "/etc/bacula/mtx_vts.pl %c %o %S %a %d"
> Changer Device = 126.177.44.30:50200
> }
>
> Autochanger {
> Name = robotarch
> Device = Drive-2
> Changer Command = "/etc/bacula/mtx_vts.pl %c %o %S %a %d"
> Changer Device = 126.177.44.30:50200
> }
>
>
> Device {
> Name = Drive-1 #
> Drive Index = 0
> Media Type = VTS
> Archive Device = /dev/tape1
> AutomaticMount = no; # when device opened, read it
> AlwaysOpen = yes;
> RemovableMedia = yes;
> RandomAccess = no;
> AutoChanger = yes;
> LabelMedia = yes;
> Label Type = IBM;
> Hardware End of Medium = no
> BSF at EOM = yes
> Backward Space Record = no
> Fast Forward Space File = no
> TWO EOF = yes
> Use MTIOCGET = no
> Maximum Changer Wait = 1h
> }
>
> Device {
> Name = Drive-2
> Drive Index = 1
> Media Type = VTS
> Archive Device = /dev/tape2
> AutomaticMount = no; # when device opened, read it
> AlwaysOpen = yes;
> RemovableMedia = yes;
> RandomAccess = no;
> AutoChanger = yes;
> LabelMedia = yes;
> Label Type = IBM
> Hardware End of Medium = no
> BSF at EOM = yes
> Backward Space Record = no
> Fast Forward Space File = no
> TWO EOF = yes
> Use MTIOCGET = no
> Maximum Changer Wait = 1h
> }
>
> Autochanger {
> Name = robotdrugi
> Device = Drive-3
> Changer Command = "/etc/bacula/mtx_vts.pl %c %o %S %a %d"
> Changer Device = 126.177.44.30:50400
> }
>
> Autochanger {
> Name = robotarchdrugi
> Device = Drive-4
> Changer Command = "/etc/bacula/mtx_vts.pl %c %o %S %a %d"
> Changer Device = 126.177.44.30:50400
> }
>
>
> Device {
> Name = Drive-3 #
> Drive Index = 0
> Media Type = VTS2
> Archive Device = /dev/tape3
> AutomaticMount = no; # when device opened, read it
> AlwaysOpen = yes;
> RemovableMedia = yes;
> RandomAccess = no;
> LabelMedia = yes;
> AutoChanger = yes
> Label Type = IBM
> Hardware End of Medium = no
> BSF at EOM = yes
> Backward Space Record = no
> Fast Forward Space File = no
> TWO EOF = yes
> Use MTIOCGET = no
> Maximum Changer Wait = 1h
> }
>
> Device {
> Name = Drive-4
> Drive Index = 1
> Media Type = VTS2
> Archive Device = /dev/tape4
> AutomaticMount = no; # when device opened, read it
> AlwaysOpen = yes;
> RemovableMedia = yes;
> RandomAccess = no;
> LabelMedia = yes;
> AutoChanger = yes
> Label Type = IBM
> Hardware End of Medium = no
> BSF at EOM = yes
> Backward Space Record = no
> Fast Forward Space File = no
> TWO EOF = yes
> Use MTIOCGET = no
> Maximum Changer Wait = 1h
> }
>
>
> bacula-dir.cfg:
>
> Storage {
> Name = VTS-Robot
> Address = serwer_bacula
> SDPort = 9103
> Password = "xxx"
> Device = robot
> Media Type = VTS
> Autochanger = yes # enable for autochanger device
> }
>
> Storage {
> Name = VTS-Robot2
> Address = serwer_bacula
> SDPort = 9103
> Password = "xxx"
> Device = robotdrugi
> Media Type = VTS2
> Autochanger = yes # enable for autochanger device
> }
>
> Storage {
> Name = VTS-Robot_arch
> Address = serwer_bacula
> SDPort = 9103
> Password = "xxx"
> Device = robotarch
> Media Type = VTS
> Autochanger = yes
> }
>
> Storage {
> Name = VTS-Robot_arch2
> Address = serwer_bacula
> SDPort = 9103
> Password = "xxx"
> Device = robotarchdrugi
> Media Type = VTS2
> Autochanger = yes
> }
>
> # Default pool definition
> Pool {
> Name = VTS
> Pool Type = Backup
> Maximum Volume Jobs = 1
> Recycle = yes # Bacula can automatically recycle
> Volumes AutoPrune = yes # Prune expired volumes
> Volume Retention = 14 days
> Label Format = "Y0"
> }
>
> # Default pool definition
> Pool {
> Name = VTS2
> Pool Type = Backup
> Maximum Volume Jobs = 1
> Recycle = yes # Bacula can automatically recycle
> Volumes AutoPrune = yes # Prune expired volumes
> Volume Retention = 14 days
> Label Format = "Y5"
> }
>
> # Scratch pool definition
> Pool {
> Name = Scratch
> Pool Type = Backup
> }
>
>
> # Archive pool definition
>
> Pool {
> Name = VTS1ARCH
> Pool Type = Backup
> Maximum Volume Jobs = 1
> Recycle = yes # Bacula can automatically recycle
> Volumes AutoPrune = yes # Prune expired volumes
> Next Pool = VTS2ARCH
> Storage = VTS-Robot_arch
> Volume Retention = 730 days
> }
>
> # Archive pool definition
> Pool {
> Name = VTS2ARCH
> Pool Type = Backup
> Maximum Volume Jobs = 1
> Recycle = yes # Bacula can automatically recycle
> Volumes AutoPrune = yes # Prune expired volumes
> Storage = VTS-Robot_arch2
> Volume Retention = 730 days
> }
>
>
> Thanks,
>
> Tomasz
>
>
> ----------------------------------------------------------------------
> Program tylko dla graczy komputerowych!
> Ogladaj >>> http://link.interia.pl/f207f
>
>
> ---------------------------------------------------------------------------
>--- Open Source Business Conference (OSBC), March 24-25, 2009, San
> Francisco, CA -OSBC tackles the biggest issue in open source: Open Sourcing
> the Enterprise -Strategies to boost innovation and cut costs with open
> source participation -Receive a $600 discount off the registration fee with
> the source code: SFAD http://p.sf.net/sfu/XcvMzF8H
> _______________________________________________
> Bacula-devel mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/bacula-devel
------------------------------------------------------------------------------
Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA
-OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise
-Strategies to boost innovation and cut costs with open source participation
-Receive a $600 discount off the registration fee with the source code: SFAD
http://p.sf.net/sfu/XcvMzF8H
_______________________________________________
Bacula-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bacula-devel
