> -----Original Message----- > From: [email protected] > [mailto:[email protected]] On > Behalf Of Stuart Cording > Sent: Monday, January 14, 2013 6:40 AM > To: [email protected] > Subject: [avrdude-dev] Adding support for ATmega32C1 in avrdude.conf > > Hi All, > > I am trying to add support for the ATmgea32C1 in avrdude.conf. My key > aim > is to support this MCU (and some others later) to be programmed using > the > Arduino IDE. > > It isn't clear to me how to correctly add a new entry for an MCU that > was > never supported by the STK500 and for which I can't find any "XML" > files in > the Atmel Studio 6 install.
Hi Stuart! You might have to go back to an earlier version of Atmel Studio / AVR Studio to find an XML file for that part. > The items that are obvious for me (id, desc, signature etc.) I have > implemented, and AVRDUDE seems to accept that the part exists (it > didn't > before, complaining that the device wasn't in the database of parts). > However, I haven't managed test actually programming a part yet. > > Would someone be willing to either: > a) Explain which parameters I must have to support Arduino programming > of > this MCU > OR > b) Check my new entry in the avrdude.conf to tell me if it is correct? A lot of times, people find similar parts and change the items that you did above (id, desc, signature, etc.). I would suggest trying to program a real part, and also post the new entry here (it didn't look like you posted in the original email), and we can review it. @Joerg Wunsch: Can we please give priority to Stuart? ;-) Thanks! Eric Weddington _______________________________________________ avrdude-dev mailing list [email protected] https://lists.nongnu.org/mailman/listinfo/avrdude-dev
