Hi Cleber, I have solved this problem by using internal IP. Sorry for confusing. It's OK now. Thank you for your helps again.
Best regards, - Li， Wei （李 伟） zKVM Solution Test IBM China Systems & Technology Lab, Beijing E-Mail: [email protected] Tel: 86-10-82450631 Notes: Wei WA Li/China/IBM Address: 3BW298, Ring Bldg. No.28 Building, ZhongGuanCun Software Park,No.8 DongBeiWang West Road, ShangDi, Haidian District, Beijing, P.R.China From: Cleber Rosa <[email protected]> To: Wei WA Li/China/IBM@IBMCN, [email protected] Date: 2016/05/30 21:21 Subject: Re: [Avocado-devel] No guest information on host arp table On 05/19/2016 10:42 AM, Wei WA Li wrote: > > I found these 3 mothod to get guest IP, but none works for me now. > Is it a problem that self.address_cache is {}? > > ---------- source ----------- > arp_ip = self.address_cache.get(nic.mac.lower()) > or > arp_ip = self.address_cache.get(nic.mac.upper()) > or > arp_ip = ip_map.get(nic.mac.lower()) > > > ---------- variable ------ > nic.mac = {'netdst': 'virbr0', 'ip': None, 'nic_name': 'nic1', 'mac': > '02:00:00:93:42:41', 'nettype': 'bridge', 'nic_model': 'virtio', > 'g_nic_name': None} > self.address_cache = {} > > > Wei, Can you better explain what you're trying to do, and what is your environment? I have added a line to boot.py: diff --git a/generic/tests/boot.py b/generic/tests/boot.py index bf4ddc9..2176493 100644 --- a/generic/tests/boot.py +++ b/generic/tests/boot.py @@ -23,6 +23,7 @@ def run(test, params, env): timeout = float(params.get("login_timeout", 240)) vms = env.get_all_vms() for vm in vms: + logging.info("VM IP address: %s", vm.get_address(0)) error.context("Try to log into guest '%s'." % vm.name, logging.info) session = vm.wait_for_login(timeout=timeout) session.close() And got the following result: ... 2016-05-30 10:17:25,036 qemu_monitor L0286 DEBUG| (monitor hmp1) Sending command 'cont' 2016-05-30 10:17:25,037 qemu_monitor L0714 DEBUG| Send command: cont 2016-05-30 10:17:25,044 boot L0026 INFO | VM IP address: 127.0.0.1 2016-05-30 10:17:25,044 error L0085 INFO | Context: Try to log into guest 'avocado-vt-vm1'. ... This IP address is actually accurate because for this run I used user level networking (the default setup). -Cleber. > Best regards, > - > Li， Wei （李 伟） > zKVM Solution Test > IBM China Systems & Technology Lab, Beijing > E-Mail: [email protected] > Tel: 86-10-82450631 Notes: Wei WA Li/China/IBM > Address: 3BW298, Ring Bldg. No.28 Building, ZhongGuanCun Software Park,No.8 > DongBeiWang West Road, ShangDi, Haidian District, Beijing, > P.R.China > > > > > From: Wei WA Li/China/IBM > To: [email protected] > Date: 2016/05/19 18:21 > Subject: No guest information on host arp table > > > Hi all, > > I have a question about def get_address(self, index=0) and log guest. > > I found there is no guest information on our host arp table. I am not sure > whether it is only way to get guest IP. > If it is not, how can I get guest IP? > > > [root@zs95kv2 guests]# arp > Address HWtype HWaddress Flags Mask > Iface > zkvm-10-20-92-160.pokpr ether 02:00:00:af:33:8a CM > vlan1292 > v1292gw10-20-92-254.pok ether 00:26:88:57:b7:f0 C > vlan1292 > ZP93K6.pokprv.stglabs.i ether 02:00:00:12:65:53 C > vlan1292 > v508gw9-12-23-1.pok.stg ether 00:26:88:59:b7:f0 C > vlan508 > 9.12.23.95 ether 00:04:96:10:44:b0 C > vlan508 > [root@zs95kv2 guests]# arp -a > zkvm-10-20-92-160.pokprv.stglabs.ibm.com (10.20.92.160) at > 02:00:00:af:33:8a [ether] PERM on vlan1292 > v1292gw10-20-92-254.pokprv.stglabs.ibm.com (10.20.92.254) at > 00:26:88:57:b7:f0 [ether] on vlan1292 > ZP93K6.pokprv.stglabs.ibm.com (10.20.92.60) at 02:00:00:12:65:53 [ether] on > vlan1292 > v508gw9-12-23-1.pok.stglabs.ibm.com (9.12.23.1) at 00:26:88:59:b7:f0 > [ether] on vlan508 > ? (9.12.23.95) at 00:04:96:10:44:b0 [ether] on vlan508 > [root@zs95kv2 guests]# > > [root@zs95kv2 guests]# virsh list > Id Name State > ---------------------------------------------------- > > [root@zs95kv2 guests]# virsh start avocado-vt-vm1 > Domain avocado-vt-vm1 started > > [root@zs95kv2 guests]# virsh console avocado-vt-vm1 > > root@zp93k6g93160:~# ip addr > 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group > default qlen 1 > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 > inet 127.0.0.1/8 scope host lo > valid_lft forever preferred_lft forever > inet6 ::1/128 scope host > valid_lft forever preferred_lft forever > 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state > UP group default qlen 1000 > link/ether 02:00:00:93:42:41 brd ff:ff:ff:ff:ff:ff > inet 10.20.93.160/24 brd 10.20.93.255 scope global eth0 > valid_lft forever preferred_lft forever > inet6 fd55:faaf:e1ab:a21:0:ff:fe93:4241/64 scope global mngtmpaddr > dynamic > valid_lft 2591990sec preferred_lft 604790sec > inet6 fe80::ff:fe93:4241/64 scope link > valid_lft forever preferred_lft forever > root@zp93k6g93160:~# > > > Best regards, > - > Li， Wei （李 伟） > zKVM Solution Test > IBM China Systems & Technology Lab, Beijing > E-Mail: [email protected] > Tel: 86-10-82450631 Notes: Wei WA Li/China/IBM > Address: 3BW298, Ring Bldg. No.28 Building, ZhongGuanCun Software Park,No.8 > DongBeiWang West Road, ShangDi, Haidian District, Beijing, > P.R.China > > > > _______________________________________________ > Avocado-devel mailing list > [email protected] > https://www.redhat.com/mailman/listinfo/avocado-devel > -- Cleber Rosa [ Sr Software Engineer - Virtualization Team - Red Hat ] [ Avocado Test Framework - avocado-framework.github.io ]
_______________________________________________ Avocado-devel mailing list [email protected] https://www.redhat.com/mailman/listinfo/avocado-devel
