Here's the information you asked for. I will probably hop on IRC tomorrow if this isn't enough information to solve the problem.
This is the public key I am attempting to use. I will note that it's RSA 4096-bit. ssh-rsa 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 And I also tried running the diagnostic command mentioned. Here's the output I got, though it doesn't appear to show anything of particular interest. OpenSSH_8.6p1, OpenSSL 1.1.1k 25 Mar 2021 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Connecting to aur.archlinux.org [95.216.144.15] port 22. debug1: Connection established. debug1: identity file /home/binary/.ssh/id_rsa type 0 debug1: identity file /home/binary/.ssh/id_rsa-cert type -1 debug1: identity file /home/binary/.ssh/id_dsa type -1 debug1: identity file /home/binary/.ssh/id_dsa-cert type -1 debug1: identity file /home/binary/.ssh/id_ecdsa type -1 debug1: identity file /home/binary/.ssh/id_ecdsa-cert type -1 debug1: identity file /home/binary/.ssh/id_ecdsa_sk type -1 debug1: identity file /home/binary/.ssh/id_ecdsa_sk-cert type -1 debug1: identity file /home/binary/.ssh/id_ed25519 type -1 debug1: identity file /home/binary/.ssh/id_ed25519-cert type -1 debug1: identity file /home/binary/.ssh/id_ed25519_sk type -1 debug1: identity file /home/binary/.ssh/id_ed25519_sk-cert type -1 debug1: identity file /home/binary/.ssh/id_xmss type -1 debug1: identity file /home/binary/.ssh/id_xmss-cert type -1 debug1: Local version string SSH-2.0-OpenSSH_8.6 debug1: Remote protocol version 2.0, remote software version OpenSSH_8.6 debug1: compat_banner: match: OpenSSH_8.6 pat OpenSSH* compat 0x04000000 debug1: Authenticating to aur.archlinux.org:22 as 'aur' debug1: load_hostkeys: fopen /home/binary/.ssh/known_hosts2: No such file or directory debug1: load_hostkeys: fopen /etc/ssh/ssh_known_hosts: No such file or directory debug1: load_hostkeys: fopen /etc/ssh/ssh_known_hosts2: No such file or directory debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: algorithm: curve25519-sha256 debug1: kex: host key algorithm: ssh-ed25519 debug1: kex: server->client cipher: chacha20-poly1...@openssh.com MAC: <implicit> compression: none debug1: kex: client->server cipher: chacha20-poly1...@openssh.com MAC: <implicit> compression: none debug1: expecting SSH2_MSG_KEX_ECDH_REPLY debug1: SSH2_MSG_KEX_ECDH_REPLY received debug1: Server host key: ssh-ed25519 SHA256:RFzBCUItH9LZS0cKB5UE6ceAYhBD5C8GeOBip8Z11+4 debug1: load_hostkeys: fopen /home/binary/.ssh/known_hosts2: No such file or directory debug1: load_hostkeys: fopen /etc/ssh/ssh_known_hosts: No such file or directory debug1: load_hostkeys: fopen /etc/ssh/ssh_known_hosts2: No such file or directory debug1: Host 'aur.archlinux.org' is known and matches the ED25519 host key. debug1: Found key in /home/binary/.ssh/known_hosts:1 debug1: rekey out after 134217728 blocks debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: rekey in after 134217728 blocks debug1: Will attempt key: /home/binary/.ssh/id_rsa RSA SHA256:1hBIpVzuvjyd456bVOYfK+XgZQbH6LoAvlrbv8xexpE debug1: Will attempt key: /home/binary/.ssh/id_dsa debug1: Will attempt key: /home/binary/.ssh/id_ecdsa debug1: Will attempt key: /home/binary/.ssh/id_ecdsa_sk debug1: Will attempt key: /home/binary/.ssh/id_ed25519 debug1: Will attempt key: /home/binary/.ssh/id_ed25519_sk debug1: Will attempt key: /home/binary/.ssh/id_xmss debug1: SSH2_MSG_EXT_INFO received debug1: kex_input_ext_info: server-sig-algs=<ssh-ed25519, sk-ssh-ed25...@openssh.com ,ssh-rsa,rsa-sha2-256,rsa-sha2-512,ssh-dss,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521, sk-ecdsa-sha2-nistp...@openssh.com, webauthn-sk-ecdsa-sha2-nistp...@openssh.com> debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Offering public key: /home/binary/.ssh/id_rsa RSA SHA256:1hBIpVzuvjyd456bVOYfK+XgZQbH6LoAvlrbv8xexpE debug1: Authentications that can continue: publickey debug1: Trying private key: /home/binary/.ssh/id_dsa debug1: Trying private key: /home/binary/.ssh/id_ecdsa debug1: Trying private key: /home/binary/.ssh/id_ecdsa_sk debug1: Trying private key: /home/binary/.ssh/id_ed25519 debug1: Trying private key: /home/binary/.ssh/id_ed25519_sk debug1: Trying private key: /home/binary/.ssh/id_xmss debug1: No more authentication methods to try. a...@aur.archlinux.org: Permission denied (publickey). On Thu, Jul 8, 2021 at 4:48 PM Eli Schwartz via aur-general < aur-general@lists.archlinux.org> wrote: > On 7/8/21 1:23 PM, Matt Spaulding via aur-general wrote: > > I have an account with the AUR and a couple of packages. I'm attempting > to > > update one of those packages and I am getting a permission denied error > > when trying to clone the git repository. Now, my SSH key has changed > and I > > went ahead and updated my SSH public key in the account settings. But > for > > some reason I still get a permission denied error. > > > > I am wondering if I am doing something wrong here, or if there is > something > > an administrator needs to fix, or something else altogether. > > > You can debug the connection fairly simply: instead of trying to git > clone, try: > > ssh -v a...@aur.archlinux.org > > You will get a lot of debug info printed out, a successful connection > should look something like this: > > > ``` > debug1: Offering public key: /home/eschwartz/.ssh/keys/aur RSA > SHA256:3JKGjA8QHS9uXZ03uBm9YjjCxJVykNkmGGEp0/aqrHo explicit > debug1: Server accepts key: /home/eschwartz/.ssh/keys/aur RSA > SHA256:3JKGjA8QHS9uXZ03uBm9YjjCxJVykNkmGGEp0/aqrHo explicit > debug1: Authentication succeeded (publickey). > Authenticated to aur.archlinux.org ([2a01:4f9:c010:50::1]:22). > > > [...] > > Interactive shell is disabled. > Try `ssh a...@aur.archlinux.org help` for a list of commands. > ``` > > You might be e.g. misconfigured and ssh is offering the wrong key. The > debug messages will, like my example, list out the actual key file it is > trying to send. > > Once you can get ssh to work without git on top, git should work too. > > Feel free to post logs, or join IRC for real-time support. > > > > Here's a link to the account in question. > > > > https://aur.archlinux.org/account/mattops > > > > > -- > Eli Schwartz > Bug Wrangler and Trusted User > > -- Best Regards, Matt
