On Thu, 26 May 2005, Christian Wengel wrote: > Hi! > > I'm goining to connect an AVM C4 to 4 BRI-lines in PTP-Mode, all BRI-lines > will have the same number (1234-XX for example). > I don't know if this is possible and I can't test it, because I don't have > these lines yet.
I don't have an AVM C4 and I did not test with 4 PtP BRI before, but there shouldn't be a problem. > Is anybody out there, running such a configuration? I'm looking for some > example configs. Especially I want to know how it is possible, to let asterisk > dynamically choose an S0 for outbound dialing. Is there a way similiar to the > way of putting some ZAP channels in one group and then use > Dial(ZAP/g1/123456789)? The ZAP dial structire e.g. (ZAP/g1/..) is not yet available (0.4.0 should have it). With 0.3.5 you just set the main PtP number (e.g. 1234) as msn for each controller. When dialing Dial(CAPI/123455...) a free channel of all controllers matching this msn will be used. > Further I want to use HylaFax to send and receive > faxes on a fixed number (1234-12 for example). Actually I use incoming=* in > capi.conf for PTP-Mode. How can I exclude the fixed fax-number, so that only > HylaFax answers this number? Hmm, why not just tell asterisk to do nothing (or wait some time) with 1234-12 and let the other application do it ? Armin _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
