|
Hello,
I want to record the message of both parties during a dial. My extensions.conf at the line where dial is looks like this:
exten => s,803,Dial(SIP/arjankroon2,30,rR)
My Sip.conf look like this:
[arjankroon2] ;Turn off silence suppression in X-Lite ("Transmit Silence"=YES)! ;Note that Xlite sends NAT keep-alive packets, so qualify=yes is not needed type=friend ;context=OUTGOING host=192.168.230.10 ; ip adres from the outbound server nat=yes ; X-Lite is behind a NAT router canreinvite=no ; Typically set to NO if behind NAT ;disallow=all allow=gsm ; GSM consumes far less bandwidth than ulaw ;allow=ulaw ;allow=alaw register => ${HOSTNAME}:<password>@192.168.230.10 ; register to outbound server
If I look at the version of Asterisk I’ve got Asterisk 1.0.0.
At the web page http://www.voip-info.org/tiki-index.php?page=Asterisk+cmd+Dial I found it is possible to use the parameters w or W.
But when I place this parameter in my dail command it doesn’t do anything.
What am I doing wrong?
Kind Regards,
Arjan Kroon Mobillion B.V. email: [EMAIL PROTECTED] internet: www.mobillion.nl
|
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
