my [EMAIL PROTECTED] box is sitting as 192.168.1.106 behind a linksys router that feeds to comcast as the provider.
trying to make outbound calls from a analog phone extension on a digium baord to broadvoice ..
system works fine analog phone to analog trunk , but cant get calls out from analog phone or softphone to broadvoice .
asterisk log throws
-- Executing Dial("Zap/1-1", "SIP/[EMAIL PROTECTED]|30") in new
stack
-- Called [EMAIL PROTECTED]
-- Got SIP response 604 "Does not exist anywhere" back from 147.135.0.128
== No one is available to answer at this time
-- Executing Congestion("Zap/1-1", "") in new stack
== Spawn extension (from-internal, 17705229625, 2) exited non-zero on 'Zap/1-1
sip .conf is
[general] port = 5060 ; Port to bind to (SIP is 5060) bindaddr = 192.168.1.106 ; Address to bind to (all addresses on machine) disallow=all allow=gsm allow=ulaw allow=alaw ;context = from-sip-external ; Send unknown SIP callers to this context callerid = Unknown context = from-broadvoice externip=69.??.??.?? localnet=192.168.1.0/255.255.255.0
====================================
sip_additional.conf shows
register=561???????:91?????????:@sip.broadvoice.com/201
*** i have tried various permutations of this
[bv] username=5618282155 user=phone type=peer secret=myPassword nat=yes insecure=very host=sip.broadvoice.com fromuser=561?????? fromdomain=sip.broadvoice.com dtmfmode=inband dtmf=inband context=from-broadvoice canreinvite=no authname=561??????
[sip.broadvoice.com] username=561???????? user=561???????? type=user secret=91??????? nat=yes insecure=very host=sip.broadvoice.com fromdomain=sip.broadvoice.com dtmfmode=inband dtmf=inband context=from-broadvoice canreinvite=no
============================
also , per postings on the boards ..i pasted this to extensions.conf ..seems that amp had not created an entry for this
exten => _1NXXNXXXXXX, 1, dial(SIP/[EMAIL PROTECTED],30) exten => _1NXXNXXXXXX, 2, congestion() exten => _1NXXNXXXXXX, 102, busy()
========================== outbound routing ... i have prefix 1 directing to the BV trunk
all (other than general section in sip.conf and the extensions.conf) were setup using amp ..seems amp does not place the entries in extension.conf ...
=========================== trunks in amp is a follows
sip trunk... outbound caller is is "broadvoice" max channels is blank no dial rules no dial prefix
outgoing settings trunk name is "bv" peer details are
authname=561??????? canreinvite=no context=from-broadvoice dtmf=inband dtmfmode=inband fromdomain=sip.broadvoice.com fromuser=561??????? host=sip.broadvoice.com insecure=very nat=yes secret=91?????? type=peer user=phone username=561???????
incoming settings user context "sip.broadvoice.com"
user details canreinvite=no context=from-broadvoice dtmf=inband dtmfmode=inband fromdomain=sip.broadvoice.com host=sip.broadvoice.com insecure=very nat=yes secret=91????? type=user user=561????? username=561????
register string ... 561??????:91?????????:@sip.broadvoice.com/201 ============================================= fyi ...
this is an [EMAIL PROTECTED] setup .... my bv number is shown as 561?????? my bv fancy password is shown as 91?????? i have a outbound rule that says numbers with prefix 1 ..go to sip/bv trunk
any help is MUCH appreciated
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
