In other words, two asterisk servers connected back to back with a T1 cross-over cable won't tell you that Asterisk's NFAS code doesn't work with Lucent 5ESS switches, or that Sangoma's code pre-firmware v1.1 and pre-driver beta6 versions won't bring up the D channels when connected with certain switches. Everything will work between two asterisk boxes perfectly.
-Chris
On 11:28 AM 5/13/2005, Charlie Watts wrote: > >That is incorrect, you need a crossover cable to go directly between two >T1 jacks if the Telco isn't in the middle. A T1/E1 crossover cable swaps >pins 1&2 with 4&5. > >For PRI, configure one end as pri_net, and the other end as pri_cpe. > >Works just fine. Lots and lots of folks do this. Channel banks, legacy >phone systems, multiple asterisk systems, modem servers. >
PGP.sig
Description: PGP signature
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
