Thanks very much for this info Andrew.
Selon Andrew Kohlsmith <[EMAIL PROTECTED]>: > On April 25, 2005 07:39 am, [EMAIL PROTECTED] wrote: > > I would like to setup a 8 FXS + 8 FXO interface using the X100P Cards. The > > problem now comes in the PCI ports. Is there any PC that can handle 16 > > ports? > > > > What is most optimal solution? > > The most optimal solution would be a TE110P + a channel bank. The TE110P is > about US$500 and a channel bank with 8FXS and 8FXO (with option to expand to > 8 more ports) will run probably US$700-1000 on ebay. > > There is 1 PCI card in your computer and a piece of external equipment (the > channel bank). You could go with 4 TDM400Ps to get the same number of ports > but you will undoubtedly have trouble with sharing IRQs and the interrupt > overhead is going to eat you alive. > > Channel banks are great; the better ones (Adit600) can do far-end disconnect > supervision and I think pretty much all of them do dynamic impedance > adjustment, meaning they're FAR less prone to echo. Just about anyone's FXS > modules work, but be careful with FXO modules on channel banks. Access Bank > I and IIs do *NOT* do far-end disconnect, meaning if someone on the other > side hangs up, Asterisk won't be able to tell. > > -A. > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
