I am running * 1.0.6 with 8 analogue phone lines connected to 2 cards - lspci reveals these as :
03:04.0 Communication controller: Tiger Jet Network Inc. Model 300 128k 03:05.0 Communication controller: Tiger Jet Network Inc. Model 300 128k The wcfxs module is loaded successfully and I have the first 3 lines actually connected. /etc/asterisk/zapata.conf is correct (channels => 1-3) The problem is that under certain circumstances (which I am unable to determine) * bridges 2 of the Zap channels together even though I can see no possible way in the dialplan. This then permanently consumes 2 lines leaving only one available. I have been watching the system for 2 days now and have managed to trap it into this condition twice - the system is only under light load. Can anyone suggest a means of tracking this down via debug commands and suchlike ? Has anyone else seen this and what was the fix ? Paul He -- Paul Hewlett (Linux #359543) Tel: +27 21 852 8812 Cel: +27 72 719 2725 Fax: +27 86 672 0563 -- _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
