On Wed, 2005-04-06 at 14:49 -0400, Ian Pattison wrote: > Hi Everybody... > > Continuing the litany of problems I'm experiencing with my new system I'm > getting issues connecting between SIP phones. > > A bit of background... I have an asterisk server running in a central > location where I have two incoming analog lines connected to FXO ports, two > analog phones connecting to FXS ports and a single SIP phone. In addition I > have a remote site connected via a CIPE VPN (ok..ok I know it's not a real > VPN...) with a single SIP phone. > > Calls initiated from the remote SIP phone to the central SIP phone often have > trouble... the user of the central phone cannot hear anything from the remote > phone although everything is heard at the remote phone. If the remote phone > calls either outside or to one of the Zap phones there is no trouble. If the > local SIP phone calls the remote SIP phone there is no trouble. Both phones > are from the same vendor, have the same firmware and the same configuration > with the exception of phone number, PIN, IP address etc. > > What am I doing wrong here? > > Ian
What *-ver. are you using? I had a problem with SIP in ver.1.0.7 and 1.0.6 so I'm still on 1.0.5 -- #Joseph _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
