----- Original Message ----- From: "Henry Jensen" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Tuesday, April 05, 2005 12:04 PM
Subject: [Asterisk-Users] TE110P/Hipath3750 - Yellow Alarm
Hello,
I've connected a TE110P from digium with a E1/T1 crossover cable, according to http://www.voip-info.org/wiki-crossover+T1+cable, to a s2m port on a Siemens Hipath 3750.
The lights on the TE110p are flashing red and green, zttool reports "Yellow Alarm"
Asterisk says:
pri_dchannel: PRI got event: Alarm (4) on Primary D-channel of span 1
pri_find_dchan: No D-channels available! Using Primary on channel anyway 16
chan_zap.c:5647 handle_init_event: Detected alarm on channel 1: Yellow Alarm
chan_zap.c:5647 handle_init_event: Detected alarm on channel 2: Yellow Alarm
[...]
/etc/zaptel.conf ================= span=1,0,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16 loadzone=fr defaultzone=fr
/etc/asterisk/zapata.conf ========================= [channels] context=remote pridialplan=local prilocaldialplan=local usecallingpres=yes busydetect=no callprogress=no callwaitingcallerid=yes echotraining=no echocancel=no echocancelwhenbridged=no overlapdial=yes immediate=no callerid=asreceived language=de rxgain=0.0 txgain=0.0 switchtype=euroisdn signalling=pri_cpe group=1 channel => 1-15,17-31
I modified the span line in zaptel.conf to span=1,1,0,ccs,hdb3,crc4 which makes no difference
When I modify it to span=1,0,0,ccs,hdb3,crc4,yellow I get "Yellow Alarm/Not Open" in zttool.
Any ideas?
Regards, Henry
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
