I know when I got that error it was because the card was not initializing the channel correctly. Meaning the line that plugged into the card was not alive or the line coding/signaling was incorrect.
Jason > From: Maik Hassel <[EMAIL PROTECTED]> > Organization: Simply Efficient - IT Services, Consulting, Training > Reply-To: Asterisk Users Mailing List - Non-Commercial Discussion > <[email protected]> > Date: Mon, 04 Apr 2005 11:34:49 -0700 > To: <[email protected]> > Subject: [Asterisk-Users] ZAP problem (No channel type registered for 'Zap') > > Hello everybody, > > I am having trouble setting up a SIP/analog phone gateway. The SIP > phones are working, just the Zaptel card doesn't seem to work. I am > using the zaptel TDM400P with one FXO module on the last bank (should be > channel 4 I suppose). > When I try to dial out (either via console or using SIP, I get the > following error: > > --- Asterix console error ----- > > *CLI> dial 9 > -- Executing Dial("OSS/dsp", "Zap/4") in new stack > Apr 4 10:18:16 WARNING[6294]: channel.c:1901 ast_request: No channel > type registered for 'Zap' > Apr 4 10:18:16 NOTICE[6294]: app_dial.c:746 dial_exec: Unable to create > channel of type 'Zap' > == Everyone is busy/congested at this time > > --- END Asterix console error ----- > > > I searched and googled now for 2 days without success, so if ANYBODY has > ANY idea, I would be really really gratefull!!! > > > Here is what I do: > > ===== /etc/Zaptel.conf ====== > loadzone=us > defaultzone=us > fxsks=4 > > ==== /etc/asterisk/zapata.conf ===== > context=local > signalling=fxs_ks > echocancel=yes > echocancelwhenbridged=yes > relaxdtmf=yes > rxgain=1.5 > txgain=1.5 > immediate=no > busydetect=no > callprogress=no > musiconhold=default > usecallerid=yes > callerid=asreceived > channel=>4 > > === extensions.conf === > [local] > ignorepat => 9 > exten => 9,1,Dial,Zap/4 > exten => 9,2,Congestion > exten => _9N.,1,Dial,Zap/4/${EXTEN:1} > exten => _9N.,2,Congestion > exten => 2000,hint,SIP/2000 ; Channel hints for presence > > ===== startup ====== > > # modprobe zaptel > # modprobe wcfxs > # /sbin/ztcfg -vvv > > > ====>> Console output: > > Zaptel Configuration > ====================== > > Channel map: > > Channel 04: FXS Kewlstart (Default) (Slaves: 04) > > 1 channels configured. > > > > ====>> Dmesg output > Zapata Telephony Interface Registered on major 196 > PCI: Found IRQ 3 for device 03:0a.0 > Freshmaker version: 71 > Freshmaker passed register test > Module 0: Not installed > Module 1: Not installed > Module 2: Not installed > Module 3: Installed -- AUTO FXO (FCC mode) > Found a Wildcard TDM: Wildcard TDM400P REV E/F (4 modules) > Registered tone zone 0 (United States / North America) > Registered tone zone 0 (United States / North America) > > > Then I start asterisk. The thing is: It really doesn't look like the zap > channel gets registered: > > [EMAIL PROTECTED] asterisk]# asterisk -vvvvc | grep channel > == Registered channel type 'Modem' (Generic Voice Modem Channel Driver) > == Registered channel type 'SIP' (Session Initiation Protocol (SIP)) > == Registered channel type 'Agent' (Call Agent Proxy Channel) > == Registered channel type 'MGCP' (Media Gateway Control Protocol (MGCP)) > == Registered channel type 'IAX2' (Inter Asterisk eXchange Driver (Ver 2)) > == Registered channel type 'Local' (Local Proxy Channel Driver) > == Registered channel type 'Skinny' (Skinny Client Control Protocol > (Skinny)) > == Registered channel type 'Console' (OSS Console Channel Driver) > == Registered channel type 'Phone' (Standard Linux Telephony API Driver) > > Does anybody have ANY idea????? > > > Thanks in advance > Maik > > > > > > > > > > > > > > -- > Simply Efficient - IT Services, Consulting, Training > "We Keep Our Promises" > Vancouver, BC > Phone: +1 604.315.8446 > Fax : +1 604.731.1147 > http://www.simplyefficient.ca > > _______________________________________________ > Asterisk-Users mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
