|
I have an eight channel fxo setup (2 TDM400P cards)
and I have them setup. Here are my configs:
Zaptel.conf:
fxsks=1-8 loadzone=us defaultzone=us Zapata.conf:
[trunkgroups]
[channels] musiconhold=default
rxwink=300 ; Atlas seems to use long (250ms) winks usecallerid=yes hidecallerid=no callerid=xxxxxx callwaiting=yes busydetect=no callprogress=no usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes echotraining=800 rxgain=0.0 txgain=0.0 group=0
callgroup=1 pickupgroup=1 immediate=no ;faxdetect=incoming faxdetect=no signalling=fxs_ks
callerid=asreceived context=from-pstn channel=>1-8 Now calling in is no problem, all the
channels pick up the incoming call just fine. However, for some reason,
calling out does not work.
When I dial out (I have a default trunk
setup) I get this on the console:
-- Executing Macro("SIP/201-1d90", "dialout-default|636399xxx") in new stack -- Executing GotoIf("SIP/201-1d90", "1?4") in new stack -- Goto (macro-dialout-default,s,4) -- Executing GotoIf("SIP/201-1d90", "1?6") in new stack -- Goto (macro-dialout-default,s,6) -- Executing Dial("SIP/201-1d90", "ZAP/g0/6363997681") in new stack -- Called g0/636399xxxx -- Zap/1-1 answered SIP/201-1d90 But it doesn't answer, nothing rings (locally or on my cellphone, the test
number I'm calling out to) it just says "connected" on the local phone but its
not actually connecting. This problem is very weird because as of 5 hours
ago, I only had 1 TDM400P card and 1 FXO chip and I could make outgoing calls
with no problems at all.
P.S.
I have checked the phone line I'm testing this on and it is
fine.
|
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
